 |
Description
|
 |
| |
 |
Features: - Active-X (Model EMACTIVE-XM) is typically used for coastal waters where ships run their X band radar only
- Active-XS (Model EMACTIVEXSM) picks up both X band and offshore S band radar for more complete protection
- Active-X and XS Radar Target Enhancer amplifies and returns an amplified response when excited by incoming radar signals
- This greatly increases your vessel's RCS, radar cross section, and the likelihood of alerting oncoming vessels of your position, especially in poor conditions
- Active-X reduces the risk of surprise or collision
- The RTE is primarily intended for small vessels with no radar fitted and typically should enhance the RCS (radar cross section) of vessels up to 25M in length
- For Small craft and rigid inflatables, improvements will start to be seen at around 1-2 miles extending to 8-10 miles or more depending on prevailing conditions
- The response of the RTE will vary according to range, RTE and radar height above sea level, radar power and condition
- Poor weather, sea state and precipitation will greatly reduce the response
- The streamlined reflector is only 27 inches high and 1.6 inches in diameter allowing for flexible installation on all sorts and sizes of vessels
Package Includes: - Onboard alarm control box that indicates to the operator their vessel is a radar target
- An alarm condition triggers both internal and external visual and audible alarms
- This model comes with a standard surface mounted box (Flush mount kit EMFMKM is Sold Separately)
- Active-X Antenna
- 80 Feet of cable
Specifications: - Operation:
- Reception frequency: X Band Radar 9.3 - 9.5 GHz , S Band Radar 2.9 - 3.1 GHz
- Operating Temperature: - 20 to + 60 degrees C
- Voltage: 12V DC - + 30% -10% (voltage surge and cross polarity protected)
- Current consumption in standby state: <23mA
- Current consumption when transmitting: X Band Radar 190mA, S Band Radar 155mA
- Position accuracy: Within 3 feet
- EIRP: 1 Watt (Typically)
- Dimensions:
- Antenna length: X band 18.76 in. , XS band 27 in.
- Antenna width: 1.6 in.
- Mounts to standard 1 x 14 Antenna mount
- Antenna weight without cable: 1.25 lbs.
- Control Box width: 3.6 in.
- Control Box height: 2 in.
- Control Box depth: 1.5 in.
- Cable length: 80 ft. X band 2 core, XS band 3 core 0.5mm2
- Cable weight: 2 lbs.
- Control Box:
- Surface mount for interior installation with optional flush mount, or waterproof version for exterior fitting
- Wire exit from bottom or rear
- Active Antenna can be special ordered without the control box for autonomous vehicles requiring just radar transponder operation
- Operation:
- Green Switch activates internal buzzer when painted by X or S Band Radar
- Green LED illuminates when being painted by X Band Radar
- Yellow LED illuminates when being painted by S Band Radar
- 8A Extension alarm facility when painted by either S or X Band Radar
- Externally accessible fuse
- Antenna Mounting Bracket:
- ACTIVE-X Stainless vertical surface bracket
- Base fitting for cabin roofs, A frames
- Mounting Options: (Sold Separately)
- Offset Mast head bracket with 10.2 in. reach and 1 inch -14NF thread
- 26" extension pole
- with:
- EN 302 752 V1.1.1. (2009-02)
- EN 60945: 2002 (Clauses 9,10 & 12)
- Complies with essential requirements of
- R & TTE Directive 1999/5/EC. CE 0191:
- Performance requirements of ISO 8729-2
- X and S Band Radar
- X Band Radar SPL
- (ISO Standard 7.5m2)
- Zero degrees: 118.33m2
- +/-10 degrees: 65.07m2
- +/- 20 degrees: 19.49m2
- S Band Radar SPL
- (ISO Standard 0.5m2)
- Zero degrees: 6.26m2 *
- +/- 10 degrees: 6.44m2*
- +/-20 degrees: 5.36m2*
|
 |
|
|
|
Keyword Or Item #
