Xantrex / Schneider Freedom SW 3012 Pure Sine Wave Inverter / Charger

See More Information for this Product

The new generation of Freedom SW inverter/chargers have been completely redesigned with many highly sophisticated and advanced features including the addition of Generator Support Mode to both the 2000W and 3000W models. This feature enables the Freedom SW to supplement a generator when AC loads exceed the generator's capacity. The new generation models also feature improved AC transfer and AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost, making the power transition almost unnoticeable.

Features:

• Parallel stacking- enables the Freedom SW inverter/chargers to double the AC output in inverter mode
• Series stacking- enables the Freedom SW inverter/chargers to generate 120/240 V split phase output(AC source must be split phase, requires Stacking Cable part# 808-9005)
• Pure sine wave output to operate sensitive electronics
• Advanced configuration options for customized applications
• Built-in transfer switch automatically transfers between inverter power and incoming AC power
• Power factor corrected, multi-stage charger for fast, efficient charging
• Temperature compensated charging for a variety of climate conditions
• Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power(sold separately)
• Wide operating temperature range: -4 F to 140 F (-20 C to 60 C)
• Conformal coated circuit boards for humid environments
• Ability to charge batteries drained to extremely low voltage
• Compatible with the Xantrex Automatic Generator Start (Part# 809-0915 sold separately)
• 2 Year Warranty
• Battery over-voltage and under-voltage protection
• Over-temperature shutdown
• Automatic overload protection
• Short-circuit protection
• Integrated, resettable AC breakers
• ETL certified to CSA 107.1, UL458 with marine supplement FCC Part 15, Class B when used with the Drip Shield(Drip Shield sold separately)

General Specifications:

• Unit dimensions: 7.75H" x 13.5W" x 15.25L"
• Compatible battery types: Flooded / gel / AGM
• Transfer relay rating: 2 legs at 30 A each
• Transfer time (AC to inverter and inverter to AC): < 20 ms
• Optimal operating temperature range: - 4 F to 140 F (- 20 C to 60 C)
• Storage ambient temperature range: - 40 F to 185 F (- 40 C to 85 C)
• Unit weight: 33.5 kg (73.7 lbs)li>

Inverter Specifications:

• Output power (continuous at 40 C): 3000 W
• Surge rating (5 seconds): 6000 W
• Peak output current: 80 A
• Output frequency: 60 Hz +/- 0.2 Hz
• Output voltage: 120 Vac
• Output wave form: Pure sine wave
• Optimal efficiency: 90%
• No-load power draw (inverting): 3 Adc
• Input DC voltage range: 10 - 16 Vdc
• AC connections Single phase in/out

Charger Specifications:

• Output current (nominal): 150 Amp
• Output voltage: 12 Volt
• Output voltage range: 3- 16 Vdc
• Charge control: 3 stage with manual equalize
• Charge temperature compensation: Remote battery sensor (included)
• Optimal Efficiency: > 85%
• AC input power factor (maximum charge): 0.98 typical
• Input current (for maximum charging): 24 A rms nominal
• Input AC voltage: 120 Vac
• Input AC voltage range 85 - 140 Vac
• Dead battery charge: > 3 Vdc

Includes:

• Freedom SW
• Owner's and installation guides
• Battery Temperature Sensor (BTS)
• DC terminal covers (one red, one black) with two sets of screws
• Two Xanbus network terminators
• Two sets of nuts and washers for the DC terminals

Optional Accessories:

• Freedom SW On/Off Remote Panel Part# 808-9002
• Automatic Generator Start (AGS) Part# 809-0915
• System control panel (SCP) Part# 809-0921
• 25' network cable for system control panel Part# 809-0940
• 75' network cable for system control panel Part# 809-0942
• Drip shield Part# 808-9004
• GFCI option Part# 808-9003
• Stacking cable for series stacking Part# 808-9005