Item #882510

Seaview Cable Gland - ABS Plastic

00 Review
$21.60 - $24.80
                  Want an email once available?
                  Buy with

                  Image of : Seaview Cable Gland - ABS Plastic Seaview Cable Gland - ABS Plastic Item # 882510

                  Description

                  The Seaview Retrofit Cable Glands provide a watertight installation for your currently installed cables. Whether you are replacing a damaged cable gland or installing one where there should have been one, these split cable glands are the only guaranteed and proven watertight installation for your currently installed cables.

                  Features:

                  • Provides a waterproof pass-through for antenna, transducer, lights, power and other cables without removal of the factory installed cable connector
                  • Tapered rubber seal forms watertight installation
                  • Base gasket also provided for clean water tight installation
                  • No need to re-run your cables - split cable glands work easily if the cable is already installed or you have a new installation
                  • Does not require connector removal during install, however you still have to consider cable diameter
                  • Each cable gland is supplied with a blank rubber seal that has a molded location to drill and cut
                  • Captive nuts make for easy assembly
                  • Low profile design for a strong, impact-resistant and clean installation (no sharp edges to hit your foot on)
                  • Inner rubber seal is flush with the top of the cable gland so that water does not have a place to collect
                  • Waterproof: IPX6 and IPX7 tested and approved
                    • IPX6 test means these pass 100L/min of water sprayed from 2.5 to 3 meters away for 3 min
                    • IPX7 test means these pass a 30 minute submersion under 1 meter of water

                  Specifications:

                  • 1 Cable Gland: can fit up to 0.39" (10 mm) Dia. Cable
                  • 1 or 2 Cable Gland: can fit up to 0.67" (17 mm) Dia. Cable

                  Part Numbers for Seaview Cable Gland - ABS Plastic

                  Related Categories

                  Related Categories

                  Reviews

                  • bvseo_sdk, p_sdk, 3.2.1
                  • CLOUD, getReviews, 47.51ms
                  • REVIEWS, PRODUCT
                  • bvseo-msg: HTTP status code of 404 was returned;

                  Questions

                  What is the size of the bottom black base? I’ve got a transducer connector that is just under 1 1/4” and want to know if this will fit 

                  Asked by: Anonymous
                  • y_2024, m_3, d_26, h_6CST
                  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
                  • cp_1, bvpage1
                  • co_hasquestions, tq_1
                  • loc_en_US, sid_conf.261606, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
                  • clientName_defendermarine
                  • bvseo_sdk, p_sdk, 3.2.1
                  • CLOUD, getContent, 46.3ms
                  • QUESTIONS, PRODUCT