Item #878403

Racor Turbine 500FG Fuel Filter/Water Separator Assembly - 500FG2

00 Review
$293.99
Want an email once available?
Buy with

Image of : Racor Turbine 500FG Fuel Filter/Water Separator Assembly - 500FG2 Racor Turbine 500FG Fuel Filter/Water Separator Assembly - 500FG2 Item # 878403

Description

Features:

  • The Racor 500FG Turbine Diesel fuel filter/water separator protects the precision components of your engine from dirt, rust, algae, asphaltines, varnishes and especially water, which is prevalent in low distillate fuels.
  • Turbine Series filter assemblies are designed to be installed on the vacuum side of the fuel transfer pump for best efficiency and protection against precision engine components from dirt
  • Contaminants are removed from fuel using the legendary three stage process described below
  • Separation: Using the fuel flow, the stationary turbine separates large solids and free water through enhanced centrifugal force
  • Coalescing: Smaller water droplets and solids coalesce on the conical baffle and fall into the collection bowl.
  • Filtration: Engines will benefit from near 100% water separation and fuel filtration with Racor's proprietary Aquabloc® water repelling media
  • Replaceable filters are available in 2, 10, and 30 micron ratings (Sold Separately)

Specifications:

  • Applications: Diesel only
  • Maximum flow rate: 60 GPH (227 LPH)
  • Water removal efficiency: 99%
  • Includes an Aquabloc 2 micron filter element and see-through bowl
  • Port Size: 3/4"-16 UNF (SAE J1926) (Port fittings sold separately)
  • Maximum working pressure: 25 PSI (1.7 bar)
  • Clean pressure drop: 0.25 PSI (1.7 kPa)
  • Ambient temperature range: -40° to +255° F (-40° to +121° C)
  • Fuel temp: 80° to 190° F (27° to 88° C
  • Dimensions: 11.5" High x 5.8" Wide x 4.8" Deep
  • Service Clearance
  • Above Assembly: 5.0" (12.7 cm)
  • Below Assembly: 2.0" (5.1 cm)

Installation Guide

WARNING

This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.

For more information go to www.p65warnings.ca.gov.

Part Numbers for Racor Turbine 500FG Fuel Filter/Water Separator Assembly - 500FG2

Related Categories

Related Categories

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 5.58ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Questions

What additional fuel line fitting adapters will I need to purchase if the 509FG will be used on a Yanmar marine engine model 4JH5E (53HP)? TY

Asked by: Tom C
Hello, the ports on this filter are 3/4´´-16 UNF at a minimum you will need a barb at each end to connect to your fuel line. If you do not already have fuel shut off's in place, you will want to add one before and after the filter. Some people add in a bypass as well.
Answered by: Upwind
Date published: 2024-01-02
  • y_2024, m_3, d_26, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_300876, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_defendermarine
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 3.67ms
  • QUESTIONS, PRODUCT