Item #887256

Vetus Type FTR470 Cooling Water Strainer

00 Review
$105.99 - $109.99
          Want an email once available?
          Buy with

          Image of : Vetus Type FTR470 Cooling Water Strainer Vetus Type FTR470 Cooling Water Strainer Item # 887256

          Description

          Features:

          • Vetus Cooling System Raw Water Filters are provided with a transparent cover allowing easy inspection of the filter without dismantling
          • The strainer can be easily mounted using the separate wall bracket
          • Strainer can be rotated 360° to align the hose connections
          • The polished stainless steel mounting bracket clamps it securely in place
          • Parallel connection of (2) Strainers (Strainers are Sold Individually)
            • With (2) water strainers in parallel a larger capacity can be obtained
            • With (2) water strainers in parallel and with the use of (2) extra valves (Valves Sold Separately) it is possible to clean each filter separately, while the engine is running
          • Due to the large active surface, the filter seldom needs to be cleaned

          Specifications:

          • Housing Material: Polypropylene GF
          • Strainer Element: HD Polyethylene
          • Lid Material: Polypropylene GF
          • Clear inspection cover
          • Mounting Bracket: Polypropylene GF / Stainless steel
          • Max. Ambient Temperature: 75° C (167° F)
          • Max. Water Temperature: 55° C (131° F)
          • Max. Pressure: 0,5 bar (50 kPa, 7 psi)
          • 1/2" (13 mm) Inlet / Outer Diameter
            • Dimensions: 111 mm H x 107 mm W
            • Recommended Input: 23 L / minute (6.1 GPM)
          • 5/8" (16 mm) Inlet / Outer Diameter
            • Dimensions: 111 mm H x 107 mm W
            • Recommended Input: 35 L / minute (9.2 GPM)
          • 3/4" (19 mm) Inlet / Outer Diameter
            • Dimensions: 111 mm H x 107 mm W
            • Recommended Input: 51 L / minute (13.5 GPM)
          • 1" (25 mm) Inlet / Outer Diameter
            • Dimensions: 162 mm H x 148 mm W
            • Recommended Input: 91 L / minute (24 GPM)
          • 1 1/4" (32 mm) Inlet / Outer Diameter
            • Dimensions: 162 mm H x 148 mm W
            • Recommended Input: 143 L / minute (37.8 GPM)
          • 1 1/2" (38 mm) Inlet / Outer Diameter
            • Dimensions: 162 mm H x 148 mm W
            • Recommended Input: 200 L / minute (53 GPM)

          Installation:

          • Always Install the water strainer above the waterline
          • Mount the strainer against a vertical bulkhead
          • Always Install a sea-cock on the water inlet scoop
          • Always use flexible hose for both connections
            • Water scoop to strainer
            • Strainer to engine
          • Use only water and/or soap to ease fitting the hoses to the hose connections
            • Never products containing grease or oil
          • Fit each hose connection with (2) stainless steel hose clamps (Sold Separately)
          • Pay attention to the flow direction through the filter

          Note: imperial dimensions are approximate, the manufacturer built this product to metric specs.

          Installation Instructions

          Part Numbers for Vetus Type FTR470 Cooling Water Strainer

          Related Categories

          Related Categories

          Reviews

          • bvseo_sdk, p_sdk, 3.2.1
          • CLOUD, getReviews, 4.07ms
          • REVIEWS, PRODUCT
          • bvseo-msg: HTTP status code of 404 was returned;

          Questions

          • bvseo_sdk, p_sdk, 3.2.1
          • CLOUD, getContent, 29.05ms
          • QUESTIONS, PRODUCT
          • bvseo-msg: HTTP status code of 404 was returned;