Item #870877

Jabsco 18590 Sealed Macerator Pump with Run-Dry Protection

00 Review
$232.99 - $246.99
          Want an email once available?
          Buy with

          Image of : Jabsco 18590 Sealed Macerator Pump with Run-Dry Protection Jabsco 18590 Sealed Macerator Pump with Run-Dry Protection Item # 870877

          Description

          Jabsco Sealed Macerator Pumps provide the ideal solution for waste, fish box and livewell tank evacuation.

          Features:

          • The Jabsco 18590 Series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area
          • Self priming to 5 feet this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes
          • Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation
          • It is recommended that holding tanks be flushed with several gallons of water after each pump out
          • This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage
          • The Jabsco Macerator Pump is the ideal pump for the emptying of fish box and livewell receptacles
          • Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank
          • If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties
          • Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline
          • Again the Jabsco Macerator pump has the characteristics that lend themselves to this application
          • The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed by the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats

          Specifications:

          • Flow Rate: 12 GPM
          • Port Size: 1-1/2" inlet ( NPT and Hose Barb options) with 1" Hose Barb Outlet
          • Stainless steel 4-blade cutter reduces particle size to 1/8" max
          • New Nitrile compound flexible impeller
          • Lip-type seal
          • Self-priming pump with stainless steel wear plate
          • Fully enclosed, permanent magnet-type motor
          • Can run dry without damage
          • Meets ISO 8846 MARINE ignition protection standards
          • Dimensions: 11-9/16" L x 3-1/4" H x 4-11/16" W
          • Nominal Voltage: 12V DC
            • Max. Current Draw: 16A
            • Recommended Fuse: 20A
          • Nominal Voltage: 24V DC
            • Max. Current Draw: 8A
            • Recommended Fuse: 15A

          Data Sheet

          WARNING

          This product can expose you to chemicals including Nickel (Metallic) which are known to the State of California to cause cancer, birth defects or other reproductive harm.

          For more information go to www.p65warnings.ca.gov.

          Part Numbers for Jabsco 18590 Sealed Macerator Pump with Run-Dry Protection

          Related Categories

          Related Categories

          Reviews

          • bvseo_sdk, p_sdk, 3.2.1
          • CLOUD, getReviews, 26.33ms
          • REVIEWS, PRODUCT
          • bvseo-msg: HTTP status code of 404 was returned;

          Questions

          • bvseo_sdk, p_sdk, 3.2.1
          • CLOUD, getContent, 32.86ms
          • QUESTIONS, PRODUCT
          • bvseo-msg: HTTP status code of 404 was returned;