Item #874310

Maretron Pressure Transducer - PT-V-0-1BAR-01

00 Review
$202.99
Want an email once available?
Buy with

Image of : Maretron Pressure Transducer - PT-V-0-1BAR-01 Maretron Pressure Transducer - PT-V-0-1BAR-01 Item # 874310

Description

Maretron pressure transducer for vacuum applications to be used with the FPM100. For maximum accuracy, you should always use the transducer with the smallest range that is sufficient for your application.

Keep in mind that the rated burst pressure of this transducer is 2.4 to 3 times the maximum measurement pressure of the transducer. If the pressure transducer will experience pressure spikes in excess of the transducer's maximum measurement pressure, use of a Pressure Snubber (PT-SNUB-01) accessory is highly recommended. The snubber will dampen pressure spikes that will be seen by the pressure transducer.

Specifications:

  • 0-1 Bar
  • Operating temperature: -40° to 105° C
  • Storage temperature: -40° to 105° C
  • Proof pressure: 2.4 x full scale
  • Burst pressure: 2.4 x full scale
  • Reverse voltage protection: ±16V over 5 minutes
  • Construction: 304L stainless steel
  • Pressure/temperature cycles: 0 to FS @ 8Hz; and 40° to 105° C for > 1.8x106 cycles
  • Thermal shock: 105° to 40° C, 0.5 hr soaks at temp. (2s Transfer) for 300 cycles
  • Vibration: 100 to 2000 Hz, 20g Sinusoidal, 3 Axes for 144 hours
  • EMC compatibility: 10V/m per EN 61000-4-3
  • Humidity: 85° C

Part Numbers for Maretron Pressure Transducer - PT-V-0-1BAR-01

Related Categories

Related Categories

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.31ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Questions

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 3.56ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;