Item #874317

Maretron Submersible Pressure Transducer - PTS-0-5PSI-01

00 Review
$421.99
Want an email once available?
Buy with

Image of : Maretron Submersible Pressure Transducer - PTS-0-5PSI-01 Maretron Submersible Pressure Transducer - PTS-0-5PSI-01 Item # 874317

Description

Maretron PTS-0-5PSI-01 Submersible Pressure Transducers are designed for measuring tank fluid levels. This submersible pressure transducer is used for tanks up to 138.4" deep.

Features:

  • Submersible pressure transducers are used together with Maretron's Fluid Pressure Monitor (FPM100 - Sold Separately), which allows tank fluid level to be broadcast over an NMEA A 2000® network where it can be monitored from any compatible NMEA 2000® display (Sold Separately)
  • When used together with Maretron displays, alerts can be set so the user can be informed of low or high tank levels
  • When not on-board the vessel, users can be notified through emails or text messages about their tank levels
  • Additionally, the tank levels can be stored using Maretron's data recorder (VDR100 - Sold Separately) for later analysis

Specifications:

  • Range: 0 to 5 PSI
  • Depth: 138.4" (3.52 m) water
  • Cable Length: 23.0' (7 m)
  • Sensor Type: Gauge (Vent Tube)
  • Output: 4 – 20 mA current loop, loop powered
  • Excitation Voltage: 9V DC to 32V DC
  • Compatible Fluids / Gases: Motor Oil, Diesel, Hydraulic Fluid, Water, Waste Water
  • Operating Temperature: 14° F to 158° F (- 10° C to 7 0 ° C)
  • Ambient Temperature: 14° F to 158° F (- 1 0° C to 7 0 ° C)
  • Accuracy: ±0.3% Full Scale typ. at 25° C
  • Total Error Band (TEB): ±1.0% Full Scale typ. (- 10° C to 70° C)
  • Non - Linearity, Hysteresis (NLH): ±0.2% Full Scale typ. Best Straight Line (BSL) at 25° C
  • Temperature Compensation Zero Point and Span: 0.04% Full Scale/° F (0. 02% Full Scale /° C)
  • Long Term Stability: 0. 2% Full Scale typ. 1 year at 25° C
  • Rise Time: 1 ms typ. (10% - 90% nominal pressure)
  • Switch - On Delay: 100 ms
  • Over Pressure: 15 PSI (1.03 bar)
  • Burst Pressure: 30 PSI (2.07 bar)
  • Vibration: 6 g (25 to 2000 Hz)
  • Shock: 50 g / 8 ms
  • Construction: AISI316L stainless steel housing, pressure connection; Ceramic, Al 2 O 3 (96%) Sensor; FKM (FPM, Viton), EPDM (TPE) seals; PUR cable
  • Minimum Cable Bend Radius: 1.57" (40 mm)
  • EMC Compatibility: EN/IEC 61000 - 6 - 3 / GL 2012, IV, Part 7 (Emission and Immunity)

Important Note: Maretron pressure transducers are not approved for use with gasoline. If you wish to use the FPM100 to monitor pressures or levels of gasoline, you must obtain a pressure transducer that is approved for use with gasoline

Installation Instructions

WARNING

This product can expose you to chemicals including Nickel (Metallic) which are known to the State of California to cause cancer, birth defects or other reproductive harm.

For more information go to www.p65warnings.ca.gov.

Part Numbers for Maretron Submersible Pressure Transducer - PTS-0-5PSI-01

Related Categories

Related Categories

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 35.16ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Questions

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 29.43ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;