Item #886227

Travaco Marine-Tex Epoxy Putty Kit

00 Review
$18.42 - $50.99
$14.74 - $50.99
19% off
                  Want an email once available?
                  Buy with

                  Image of : Travaco Marine-Tex Epoxy Putty Kit Travaco Marine-Tex Epoxy Putty Kit Item # 886227

                  Description

                  Features:

                  • Marine-Tex Epoxy Putty is a heavy-duty structural epoxy
                  • Applications:
                    • Repair aluminum, fiberglass and wooden boats
                    • Reinstall loose or stripped fasteners
                    • Permanently bond dissimilar metals without galvanic corrosion
                  • Marine-Tex paste provides waterproof repairs that can be used with fiberglass tape or cloth to bridge holes and reinforce structural repairs as needed
                  • Easy-to-apply paste for emergency and permanent repairs to machinery and equipment, hulls, decks, stripped fasteners, and tanks
                    • Including exhaust lines, outdrives, tanks, piping and stringers
                    • Marine-tex can be used to repair gouges in wood and fiberglass making the repaired area stronger than before
                  • Marine-Tex is a creamy paste consistency that can be applied on vertical or horizontal surfaces
                  • Easily fills gaps, and can be shaped to rebuild damaged components
                  • Sufficient working time for complex repairs
                  • Marine-Tex can be sanded or ground to shape, tapped and drilled, and finished with most common paints and coatings

                  Specifications:

                  • Coverage:
                    • (2) Ounces covers 17 square inches at 1/8" thick
                    • (14) Ounce Kit: 124 square inches at 1/8" thick
                    • Maximum applied thickness is 1-1/2 inches
                  • Mixing Ratio:
                    • (5) parts epoxy resin to 1 part hardener by volume
                    • When mixing by weight, the ratio is 6.3 parts resin to 1 part hardener
                    • Always keep the epoxy at room temperature before mixing
                  • Cure Time:
                    • (24) hours at a constant temperature of 72 degrees F
                    • Lower temperatures will create longer cure times
                    • It is not recommended to apply the product in temperatures below 55 degrees F
                  • Compressive Strength:
                    • Gray - 13,000 PSI (910 Kg/Cm2)
                    • White - 8,700 PSI (610 Kg/Cm2)
                  • Adhesion Shear Strength:
                    • Gray - 1,800 PSI (126 Kg/Cm2)
                    • White - 2,300 PSI (160 Kg/Cm2)
                  • Chemical Resistance: Most common acids, alkalies and hydrocarbons.
                  • Tensile Strength: 4,000 PSI (280 Kg/Cm2)

                  In the Box:

                  • Catalyst
                  • Resin
                  • Instructions

                  Note: All strengths are dependent upon make-up of substrate and surface preparation.

                  Part Numbers for Travaco Marine-Tex Epoxy Putty Kit

                  Reviews

                  • bvseo_sdk, p_sdk, 3.2.1
                  • CLOUD, getReviews, 3.72ms
                  • REVIEWS, PRODUCT
                  • bvseo-msg: HTTP status code of 404 was returned;

                  Questions

                  • bvseo_sdk, p_sdk, 3.2.1
                  • CLOUD, getContent, 3.37ms
                  • QUESTIONS, PRODUCT
                  • bvseo-msg: HTTP status code of 404 was returned;