Item #884545

Star brite Snappy 2-Part Teak Cleaner and Restorer Kit with Brushes - STN-Qkit

00 Review
$37.99
Want an email once available?
Buy with

Image of : Star brite Snappy 2-Part Teak Cleaner and Restorer Kit with Brushes - STN-Qkit Star brite Snappy 2-Part Teak Cleaner and Restorer Kit with Brushes - STN-Qkit Item # 884545

Description

Important Note: Snappy™ Teak-Nu™ Formula No. 1 must be used with Snappy™ Teak-Nu™ Formula No. 2 to achieve best results.

Snappy Teak-Nu is an easy to use one part of a two-part teak cleaner and restorer process.

Features:

  • Please use both steps with Teak-Nu #1 and Teak-Nu #2 as the chemical reaction between the two products is what leaves teak looking brand new
  • Function: Removes gray weathering, dirt, rust, fish blood and fuel stains, leaving teak with that fresh sanded look
  • No hard scrubbing or bronze wool required
  • Will not soften deck seams
  • Avoid contact with painted or varnished surfaces
  • Made in the USA
  • Container size: (1) 32 oz step 1 and (1) 32 oz step 2

Directions:

Badly soiled, oiled or coated teak :

  • Wear protective gloves
  • Apply Snappy™ Teak-Nu™ Formula No. 1 directly to wet deck
  • Use a bristle brush to spread evenly across area to be treated
  • When the treated area darkens to a uniform dark brown, use coarse bristle brush to scrub wood
  • Avoid contact with painted or varnished surfaces
  • Rinse brushes after use
  • Next, use bristle brush to spread Snappy™ Teak-Nu™ Formula No. 2 uniformly over the treated area, then use coarse bristle brush to loosen and remove dirt
  • The treated area will lighten to a golden brown
  • Rinse treated area thoroughly with water.

Lightly soiled teak:

  • Wear protective gloves (Sold Separately)
  • Use water to dilute Snappy™ Teak-Nu™ Formula No. 1 to an approximately 50% solution
  • Use bristle brush to spread evenly over area to be treated
  • When the treated area darkens to a uniform dark brown, use medium bristle brush to scrub lightly
  • Avoid contact with painted or varnished surfaces
  • Rinse brushes thoroughly after use.
  • Next, use water to dilute Snappy™ Teak-Nu™ Formula No. 2 to an approximately 50% solution, then use bristle brush to spread uniformly over treated area
  • Use soft bristle brush to scrub lightly to attain a uniform light color
  • Rinse treated area thoroughly
  • When the treated area is completely dry, the deck will look like it has been freshly sanded

Helpful Suggestions:

  • Immediately rinse off any drips, spills or splatters of Snappy™ Teak-Nu™ Formula No. 1 on painted or varnished surfaces, aluminum, fiberglass or any surface other than teak. Snappy™ Teak-Nu™ Formula No. 1 may damage paint or varnish if not immediately removed. Rinse brushes after each use.
  • To help avoid drips, spills or splatter onto painted or varnished surfaces adjacent to teak being treated, apply Snappy™ Teak-Nu™ Formula No. 1 with a paint brush. Spray a mist of water on any areas which have dried before applying Snappy™ Teak-Nu™ Formula No. 2.
  • Snappy™ Teak-Nu™ Formulas Nos. 1 and 2 can be used on bare mahogany before refinishing to remove discolorations without bleaching the wood

Part Numbers for Star brite Snappy 2-Part Teak Cleaner and Restorer Kit with Brushes - STN-Qkit

Related Categories

Related Categories

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 5.44ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Questions

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 3.64ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;