Item #880434

Scandvik SS ABA Hose Clamp

4.54 Reviews
$5.29 - $54.99
$5.29 - $54.99
10% off
                  Want an email once available?
                  Buy with

                  Image of : Scandvik SS ABA Hose Clamp Scandvik SS ABA Hose Clamp Item # 880434

                  Description

                  Features:

                  • Scandvik ABA 316 stainless steel hose clamps feature acid resistance
                  • No perforations in the band
                  • Rolled up band edges to minimize hose wear
                  • Vibration proof six degree thread pitch
                  • Hex head worm screw 9/32" (7 mm) across flats
                  • Band Width:
                    • Size SAE 3 - 5 = 3/8"
                    • Size SAE 8 - 186 = 1/2"

                  General Features:

                  • ABA 316 stainless steel clamps are the ideal choice for applications where premium corrosion resistance is required
                  • All parts are made of 316 stainless steel
                  • All Pressed Worm Gear Housing
                    • The all pressed worm housing increases the strength of the hose clamp by 30%
                    • Since the radius of each housing is carefully adapted to the relevant hose diameter and due to the smooth transition between housing and band, extremely good compatibility with the shape of the hose is achieved
                  • Intact Grain Structure
                    • The intact grain structure increases the strength reserve of the clamp and enables you to use an ABA clamp up to 10 times
                    • The material in the band is compressed at each ridge of thread without the fibers of the steel being sheared off
                  • Rolled-Up Band Edges
                    • The rolled-up band edges of the ABA hose clamp prevents it from cutting into the hose and forming such a smooth transition between the edge of the band and the hose that crack formation and fractural impressions are avoided
                    • Consequently even inexpensive hoses last longer
                    • The threads are specially stamped and leave the inside of the clamp completely smooth
                    • The smooth inside of the band eliminates friction between the hose and the band, thus the clamp will seal 360° around
                  • Thread Engagement
                    • Thread engagement gives strength and reliability
                    • The square threads of the screw are rolled and those on the band stamped by a special process
                    • The 6" thread pitch angle not only gives you a completely vibration-proof clamp but also a clamp which grips the hose more firmly all the way around without calling for more force on the screwdriver
                  • Parts Inspection
                    • During the manufacturing process, the ABA hose clamp passes through nine series of inspections covering material, tolerances and properties
                    • To give one example, the clamp is test-loaded to predetermined tightening torque
                    • The offload torque, which should not exceed 1 Nm, is checked on every 50th clamp

                  Clamping Ranges

                  WARNING

                  This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.

                  For more information go to www.p65warnings.ca.gov.

                  Part Numbers for Scandvik SS ABA Hose Clamp

                  Reviews

                  Rated 5 out of 5 by from Strong, Worth it for below waterline thru-hulls These may seem pricey, but they're worth it. I don't mind using less expensive pierced hose clamps on interior systems, but these are a must have for below the waterline connections and thru hulls. The screw barrel is also narrower than other brands, which makes things less likely to catch on it in tight places.
                  Date published: 2024-02-06
                  • y_2024, m_3, d_27, h_9
                  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
                  • cp_1, bvpage1
                  • co_hasreviews, tv_3, tr_1
                  • loc_en_US, sid_conf.503668, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
                  • clientName_defendermarine
                  • bvseo_sdk, p_sdk, 3.2.1
                  • CLOUD, getReviews, 32.41ms
                  • REVIEWS, PRODUCT

                  Questions

                  What's the difference between this and the "smooth band" version?

                  Asked by: JoeW
                  These are WAY BETTER! But of course 2X+ the price. Here is a link to a whole article on hose clamps all tested and reviewed. https://www.practical-sailor.com/systems-propulsion/diesel-engines/stainless-steel-hose-clamps?MailingID=1522&sc=WIR20240218-&st=email&utm_source=ActiveCampaign&utm_medium=email&utm_content=Stainless-steel+Hose+Clamps&utm_campaign=WIR20240218- You may have to subscribe to read it however. Ben S/V DAWN
                  Answered by: PacificVoyager
                  Date published: 2024-03-07
                  • y_2024, m_3, d_27, h_9CST
                  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
                  • cp_1, bvpage1
                  • co_hasquestionsanswers, tq_1
                  • loc_en_US, sid_conf.503668, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
                  • clientName_defendermarine
                  • bvseo_sdk, p_sdk, 3.2.1
                  • CLOUD, getContent, 26.07ms
                  • QUESTIONS, PRODUCT