Item #860782

Antal V-CAM 814 Silver Handle Series Rope Clutch

00 Review
$114.99 - $401.99
$114.99 - $401.99
10% off
                  Want an email once available?
                  Buy with

                  Image of : Antal V-CAM 814 Silver Handle Series Rope Clutch Antal V-CAM 814 Silver Handle Series Rope Clutch Item # 860782

                  Description

                  The V-Grip is an Antal-patented system for rope locking that works by exerting pressure on 3 sides of the line with higher friction and, consequently, with lower pressure in order not to damage line covers.

                  Note: Consider choosing the clutch with smaller range size for maximum holding when using with Hi-tech lines, due to new jackets and coatings. This does not apply to standard double braid polyester lines.

                  Features:

                  • Exerts pressure on 3 sides
                    • Unlike traditional, flat cam, V-Grip is fitted with V-shaped cam for improved holding strength without damaging line cover
                  • Load distribution
                    • Curved base V-Cam pair increases bearing surface, preventing load from being concentrated at a critical point.
                    • Line retrieval can be achieved with lever closed
                    • Line stops automatically in new position with no slippage
                  • Emergency opening
                    • Line can be released under load without use of winch
                    • Antal mechanism guarantees easy opening even under heavy conditions

                  Note: V-CAM Silver Handle Series Clutch maximum loads vary with line diameter

                  Part Numbers for Antal V-CAM 814 Silver Handle Series Rope Clutch

                  Related Categories

                  Related Categories

                  Reviews

                  • bvseo_sdk, p_sdk, 3.2.1
                  • CLOUD, getReviews, 29.43ms
                  • REVIEWS, PRODUCT
                  • bvseo-msg: HTTP status code of 404 was returned;

                  Questions

                  Can this be side mounted?

                  Asked by: budd
                  Yes it can , we realy like ours 
                  Answered by: Black cyril
                  Date published: 2024-01-28

                  what is the hole spacing to the centerline of the hole pattern I need 2 3/4"

                  Asked by: Mark
                  Hello, The holes on center are 105mm = 4 9⁄64" The Spinlock xtr, xtx look like they will fit the holes. You would need to decide if they meet your load, line size, usage needs etc.. Link: https://www.spinlock.co.uk/en-GB/usa/products/xtr https://www.spinlock.co.uk/en-GB/usa/products/xts https://defender.com/en_us/spinlock-xtr-single-powerclutch https://defender.com/en_us/catalogsearch/result/?q=xts
                  Answered by: Upwind
                  Date published: 2024-02-19
                  • y_2024, m_3, d_27, h_9CST
                  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
                  • cp_1, bvpage1
                  • co_hasquestionsanswers, tq_2
                  • loc_en_US, sid_conf.609065, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
                  • clientName_defendermarine
                  • bvseo_sdk, p_sdk, 3.2.1
                  • CLOUD, getContent, 42.35ms
                  • QUESTIONS, PRODUCT