Cart   null      null
Track Orders
Customer Service
My Account
Logo linked to Defender Homepage
 Call or email to speak with our in-house knowledgeable staff.
Phone: 800-628-8225 | Int'l.: 860-701-3400 | Email: Contact Us
Maretron BHW100 Bilge High Water Detector
Maretron BHW100 Bilge High Water Detector
Maretron BHW100 Bilge High Water Detector
Maretron BHW100 Bilge High Water Detector

Maretron BHW100 Bilge High Water Detector

  • Applications: Accessory for SIM100 Switch Indicator Module
  • Function: Sends a Signal to the Maretron SIM100 Switch Indicator Module
  • Molded-in "Target" on the Side of the Unit is Visible
  • Item #: 
    257394
    Brand: 
    Maretron
    Model #: 

    BHW100

    Packaged Weight: 
    0.10 Lbs.
    List Price: 
    $55.00
    Our Price:
    $46.99
    257394 Maretron Maretron BHW100 Bilge High Water Detector BHW100

    The BHW100 Bilge High Water Detector provide immediate response to rising water, sending a signal to the Maretron SIM100 Switch Indicator Module.

    Features:

    • Accessory for SIM100 Switch Indicator Module
    • Will indicate high water by illuminating the red LED and sending a signal to the Maretron Switch Indicator Module (SIM100)
    • Molded-in "Target" on the side of the unit is visible*

    *Installation Instructions BHW100 Bilge High Water Detector

    • The BHW100 sensor has a target molded into the plastic enclosure (opposite the side with the Maretron label)
    • The target should be exposed so that when the water rises above the middle of the target, the BHW100 will indicate high water by illuminating the red LED and sending a signal to the Maretron Switch Indicator Module (SIM100)
    • The BHW100 is mounted to a vertical wall in the bilge with the label pointed in towards the wall and the target facing outward into the bilge
    • The BHW100 always act immediately to rising water. However, there can be some delay to receding water while the water evaporates off the face of the BHW100
    • Here are some tips to make the BHW100 act quickly to receding water:
      • 1) Mount the BHW100 to a vertical wall in the horizontally direction as shown in the attached instruction sheet. This helps water quickly run off the BHW100
      • 2) Cover the mounting screws and metal mounting sleeves with some silicone
        • Water bridging between the target and mounting screws makes the BHW100 think it's still under water
        • Eventually the water evaporates and the BHW100 shuts off
        • If you prevent the un-evaporated water from bridging between the target and screws, you will get the BHW100 to react much quicker to the receding water

    For further details see Installation Guide

    Maretron BHW100 Bilge High Water Detector
    46.99
    Status:    null In Stock

    The BHW100 Bilge High Water Detector provide immediate response to rising water, sending a signal to the Maretron SIM100 Switch Indicator Module.

    Features:

    • Accessory for SIM100 Switch Indicator Module
    • Will indicate high water by illuminating the red LED and sending a signal to the Maretron Switch Indicator Module (SIM100)
    • Molded-in "Target" on the side of the unit is visible*

    *Installation Instructions BHW100 Bilge High Water Detector

    • The BHW100 sensor has a target molded into the plastic enclosure (opposite the side with the Maretron label)
    • The target should be exposed so that when the water rises above the middle of the target, the BHW100 will indicate high water by illuminating the red LED and sending a signal to the Maretron Switch Indicator Module (SIM100)
    • The BHW100 is mounted to a vertical wall in the bilge with the label pointed in towards the wall and the target facing outward into the bilge
    • The BHW100 always act immediately to rising water. However, there can be some delay to receding water while the water evaporates off the face of the BHW100
    • Here are some tips to make the BHW100 act quickly to receding water:
      • 1) Mount the BHW100 to a vertical wall in the horizontally direction as shown in the attached instruction sheet. This helps water quickly run off the BHW100
      • 2) Cover the mounting screws and metal mounting sleeves with some silicone
        • Water bridging between the target and mounting screws makes the BHW100 think it's still under water
        • Eventually the water evaporates and the BHW100 shuts off
        • If you prevent the un-evaporated water from bridging between the target and screws, you will get the BHW100 to react much quicker to the receding water

    For further details see Installation Guide


    Maretron Gas Fume Detector
    Item #: 258334
  • Detects Carbon Monoxide ( CO )
  • Use with SIM100 Vessel Monitoring System
  • 12 Volts DC, NMEA 2000® Network Monitoring
  •  
    null
    List Price: $145.00
    Our Price: $123.99
    Model #: CO-CO1224T
    Customer Service Why Buy from Defender?
    null