Defender Home Page
Call or email to speak with our In-House Technical Staff/Advisors
Phone: 800-628-8225 Int'l.: 860-701-3400 Email: Contact Us
Follow us on Facebook
Shipping Info
Defender Home Page
Your Cart
null
null
null View Cart View Shopping Cart
null Check My Order(s)
null Track My Package(s)
Metric/Inch
Conversion Chart
Categories
Shopping Areas
Information
Boats & Motors
null Defender Seal null
promo A
promo B
promo C
promo D
 
 

Awlgrip Polyester Urethane Topcoat Base

  • Color: Light Gray / Gamma Gray, Long Lasting; High Gloss Finish
  • Requires G3010 (Spray) or H3002 (Brush) Converter (Sold Separately)
  • Applications: Above the Waterline Use Only, Container Size: Gallon
  • Item #: 
    753745
    Brand: 
    Awlgrip
    Model #: 

    G1001

    Packaged Weight: 
    12.25 Lbs.
    Our Price:
    $219.99
    753745 Awlgrip Awlgrip Polyester Urethane Topcoat Base G1001

    Features:

    • Awlgrip top side coatings systems protects from harsh marine elements above the waterline
    • A polyester based high gloss polyurethane topcoat giving long lasting gloss and color retention
    • Awlgrip provides a durable high gloss finish to wood, fiberglass, aluminum or steel
    • Applied with a roller, brush or spray gun
    • Superior resistance to sun, saltwater, chemicals and abrasion
    • Awlgrip is ideal for coating everything from topsides, cabin tops, decks and masts to engines

    General Application Instructions:

    • The primed surface must be clean and dry
    • Achieving maximum gloss and distinction of image requires the primer be smooth sanded with 220-320 grit paper before topcoat application
    • Using a contrasting mist coat of lacquer primer as a "guide coat" is recommended
    • Smooth sanding until all the "guide coat" is removed indicates a texture free surface
    • Two to three coats are recommended for spray applications
    • Brush/Roller applications require two coats
      • Regardless of application method two coats is the minimum
      • Top coating cannot be done in one coat
    • Brush/Roller application:
      • Apply Awlgrip Topcoat Base in two coats of 1.5 to 2.5 mils WFT each
      • Allow 16 hours between each coat
      • Sanding between coats with 280 to 400 grit paper will provide a smoother finish
      • On large surfaces such as hull sides, transoms, and house sides, first roll the Awlgrip Topcoat and then smooth the roller stipple by lightly tipping the surface with a brush
      • This can be done with 2 painters working side by side (i.e., 1 rolling and 1 tipping), or with 1 painter rolling approximately 6 square feet and then tipping that area before rolling any further
      • Do not apply paint materials to surfaces warmer than 105 degrees F or colder than 55 degrees F
        • Do not attempt to cure products at temperatures below 55 F
    Awlgrip Polyester Urethane Topcoat Base
    219.99
    Status:  null Call to confirm

     

    shipping delay

     

    Warning This product ships ground only


    Features:

    • Awlgrip top side coatings systems protects from harsh marine elements above the waterline
    • A polyester based high gloss polyurethane topcoat giving long lasting gloss and color retention
    • Awlgrip provides a durable high gloss finish to wood, fiberglass, aluminum or steel
    • Applied with a roller, brush or spray gun
    • Superior resistance to sun, saltwater, chemicals and abrasion
    • Awlgrip is ideal for coating everything from topsides, cabin tops, decks and masts to engines

    General Application Instructions:

    • The primed surface must be clean and dry
    • Achieving maximum gloss and distinction of image requires the primer be smooth sanded with 220-320 grit paper before topcoat application
    • Using a contrasting mist coat of lacquer primer as a "guide coat" is recommended
    • Smooth sanding until all the "guide coat" is removed indicates a texture free surface
    • Two to three coats are recommended for spray applications
    • Brush/Roller applications require two coats
      • Regardless of application method two coats is the minimum
      • Top coating cannot be done in one coat
    • Brush/Roller application:
      • Apply Awlgrip Topcoat Base in two coats of 1.5 to 2.5 mils WFT each
      • Allow 16 hours between each coat
      • Sanding between coats with 280 to 400 grit paper will provide a smoother finish
      • On large surfaces such as hull sides, transoms, and house sides, first roll the Awlgrip Topcoat and then smooth the roller stipple by lightly tipping the surface with a brush
      • This can be done with 2 painters working side by side (i.e., 1 rolling and 1 tipping), or with 1 painter rolling approximately 6 square feet and then tipping that area before rolling any further
      • Do not apply paint materials to surfaces warmer than 105 degrees F or colder than 55 degrees F
        • Do not attempt to cure products at temperatures below 55 F
     
     

     
     

    Have A Suggestion?


    This form is intended to improve the current product page. For Customer Service, please click here

    Help us make our site better for everyone! Let us know you've found something wrong or frustrating on this page and we will improve it. Please mark each that apply.










    Comments or Examples:
    Examples: Missing information such as dimensions and model number, typos, inaccuracies, etc...

                





           
    Defender Email Specials
    Click Here For Our Privacy Policy
     
    null