Defender Home Page
Call or email to speak with our In-House Technical Staff/Advisors
Phone: 800-628-8225 Int'l.: 860-701-3400 Email: Contact Us
Follow us on Facebook
Shipping Info
Defender Home Page
Your Cart
null
null
null View Cart View Shopping Cart
null Check My Order(s)
null Track My Package(s)
Metric/Inch
Conversion Chart
Categories
Shopping Areas
Information
Boats & Motors
space separator Defender Seal space separator
promo A
promo B
promo C
promo D
 
 

West System 206 Slow Hardener - 121 Ounces

  • Formulated for Use with 105 Epoxy Resin, Mix Ratio*
  • Extends Working and Cure Times When Working at Higher Temperatures
  • Size: 121 . (3.58 L)
  • Item #: 
    750368
    Brand: 
    West System
    Model #: 

    206-C

    Packaged Weight: 
    8.85 Lbs.
    List Price: 
    $162.50
    Our Price:
    $154.99
    750368 West System West System 206 Slow Hardener - 121 Ounces 206-C

    West System 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures.

    Features:

    • 105 / 206 mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties
    • Wets out and bonds to wood fiber, fiberglass, reinforcing fabrics, foam and other composite materials, as well as a variety of metals
    • 105 / 206 Epoxy can be thickened with West System fillers to bridge gaps and fill voids and can be sanded and shaped when cured
    • With roller applications, has excellent thin-film characteristics, allowing it to flow out and self-level without "fish-eyeing"
    • Multiple coats of 105 / 206 create a superior moisture barrier and a tough, stable base for paints and varnishes
    • Formulated without volatile solvents
    • Has a relatively high flash point, no strong solvent odor and does not shrink after curing
    • It is not intended for clear coating natural finished wood

    Handling characteristics:

    • Mix ratio: (5) parts resin : (1) part hardener
    • Pot life at 72°F (22°C): 20 to 25 minutes
    • Cure to solid state: 10 to 15 hours
    • Cure to maximum strength: 1 to 4 days
    • Minimum recommended temperature for curing: 60°F (16°C)

    For further details See Data Sheet for This Product

    * Dispensing and Mixing

    • Dispense the proper proportions of resin and hardener into a clean plastic, metal or wax-free paper container
    • Don't use glass or foam containers because of the potential danger from exothermic heat buildup
    • DO NOT attempt to adjust the epoxy cure time by altering the mix ratio
      • An accurate ratio is essential for a proper cure and full development of physical properties
    • Dispensing with Mini pumps
        • Most problems related to curing of the epoxy can be traced to the wrong ratio of resin and hardener
        • To simplify metering, we recommend using calibrated WEST SYSTEM Mini Pumps to dispense the resin and hardener
        • Mini Pumps are calibrated to deliver the proper working ratio of resin to hardener
        • Pump one full pump stroke of resin for each one full pump stroke of hardener
        • Depress each pump head fully and allow the head to come completely back to the top before beginning the next stroke
      • Partial strokes will give the wrong ratio
      • Read the pump instructions before using pumps
      • Before you use the first mixture on a project, verify the proper ratio according to the instructions that come with the pumps
      • Re-check the ratio anytime you experience problems with curing
    • Dispensing without Mini Pumps (Weight/volume measure):
      • To measure 105 Resin and 205 or 206 Hardener by weight or volume, combine five parts resin with one part hardener
      • To measure 105 Resin and 207 or 209 Hardener by volume, combine three parts resin with one part hardener (by weight, 3.5 parts resin-1 part hardener)
    West System 206 Slow Hardener - 121 Ounces
    154.99
    Status:  null In Stock

     


     

    Warning This product ships ground only


    West System 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures.

    Features:

    • 105 / 206 mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties
    • Wets out and bonds to wood fiber, fiberglass, reinforcing fabrics, foam and other composite materials, as well as a variety of metals
    • 105 / 206 Epoxy can be thickened with West System fillers to bridge gaps and fill voids and can be sanded and shaped when cured
    • With roller applications, has excellent thin-film characteristics, allowing it to flow out and self-level without "fish-eyeing"
    • Multiple coats of 105 / 206 create a superior moisture barrier and a tough, stable base for paints and varnishes
    • Formulated without volatile solvents
    • Has a relatively high flash point, no strong solvent odor and does not shrink after curing
    • It is not intended for clear coating natural finished wood

    Handling characteristics:

    • Mix ratio: (5) parts resin : (1) part hardener
    • Pot life at 72°F (22°C): 20 to 25 minutes
    • Cure to solid state: 10 to 15 hours
    • Cure to maximum strength: 1 to 4 days
    • Minimum recommended temperature for curing: 60°F (16°C)

    For further details See Data Sheet for This Product

    * Dispensing and Mixing

    • Dispense the proper proportions of resin and hardener into a clean plastic, metal or wax-free paper container
    • Don't use glass or foam containers because of the potential danger from exothermic heat buildup
    • DO NOT attempt to adjust the epoxy cure time by altering the mix ratio
      • An accurate ratio is essential for a proper cure and full development of physical properties
    • Dispensing with Mini pumps
        • Most problems related to curing of the epoxy can be traced to the wrong ratio of resin and hardener
        • To simplify metering, we recommend using calibrated WEST SYSTEM Mini Pumps to dispense the resin and hardener
        • Mini Pumps are calibrated to deliver the proper working ratio of resin to hardener
        • Pump one full pump stroke of resin for each one full pump stroke of hardener
        • Depress each pump head fully and allow the head to come completely back to the top before beginning the next stroke
      • Partial strokes will give the wrong ratio
      • Read the pump instructions before using pumps
      • Before you use the first mixture on a project, verify the proper ratio according to the instructions that come with the pumps
      • Re-check the ratio anytime you experience problems with curing
    • Dispensing without Mini Pumps (Weight/volume measure):
      • To measure 105 Resin and 205 or 206 Hardener by weight or volume, combine five parts resin with one part hardener
      • To measure 105 Resin and 207 or 209 Hardener by volume, combine three parts resin with one part hardener (by weight, 3.5 parts resin-1 part hardener)
     
     

    West System Resin Mini Pumps Set
    Item #: 754429
  • One Set For Groups A, B, C, Mix Ratio*
  • One resin pump and two hardener pumps
  • Sold as a Set of (3) Pumps
  •  
    null
    List Price: $17.13
    Our Price: $15.99
    Model #:
    300
     
     
     

    Have A Suggestion?

     
           
    Defender Email Specials
    Click Here For Our Privacy Policy
     
    null