Keyword Or Item #
Andersen No. 40 Standard Compact Variable Speed Self-Tailing Electric Winch
Item #:
614662
Brand:
Andersen
Model #:
2040005100
Shipping Weight:
55.00
Lbs.
List Price:
$5,295.00
Our Price:
$4,480.19
Note:
This item ships from the manufacturer.
It typically ships within 2 business days (more...)
It typically ships within 2 business days (more...)
Status: 
Ships Direct
Ships Direct
Quantity:
Andersen's Compact Self-Tailing Electric Winches are made with uncompromising quality, precision and reliability allowing you to manage your sails with the utmost confidence, efficiency and safety. The motor was created by Andersen specifically for marine winch use. It is truly compact and the variable speed design gives superb sail control and fine adjustment capability.
Features:
- Motor, gears and control box are integrated into one compact unit
- Highly efficient motor with impressive line speed and first-rate maximum load
- The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear
- 30-50% less power consumption compared to a conventional electric motor
- Variable-speed compact motor is especially developed for use as a marine winch motor
- Smooth Power Rib© drum has vertical ribs on the surface providing maximum grip with minimum wear on lines
- The self-tailing system adjusts automatically to suit various line sizes, the self-tailing arm adjusts through 360 degrees
- Curved self-tailing arm gives a fair lead, friction is minimized due to the holding power of the drum
- Aluminum-bronze upper base plate is approximately 2-1/2 times stronger than traditional bronze
- Clever design and material selection result in strength and weight similar to or lighter than aluminum winches
- Drum design allows fewer turns on the winch making tacking and sail handling easier
- Captive pawls and springs make servicing and greasing easy
- Extremely strong machined AISI 316 cold-pressed stainless steel pawls
- AISI 329 stainless steel drive shaft
- Upper and lower bearings are designed to be as far apart as possible, resulting in increased support for the drum while increasing efficiency
- Large-diameter bearing to absorb drum loads and increase efficiency
- Winch mounts directly onto the motor for easy deck or mast installation
- Control switch with step-less speed control-The more you push the control button down, the more power and line speed you will get
- Circuit breaker safety switch with circuit board provides reliable circuit protection and has LED indicators for easy trouble shooting
- The motor stops and the control switch light flashes before damaging the motor if the: Maximum winch load is exceeded, maximum temperature is exceeded, Use by more than one control switch or if the run time is to long
- Modular system allows for motor upgrades/changes in the future without having to drill new holes
- Includes: Winch, deck mount motor, stainless steel sleeve, O-rings, drain hose, circuit breaker with thermo cut out, variable speed switch, 1m control cable, winch tool and manual with template (Requires wire, mounting bolts and power source)
- 3-Year Warranty
Motor
Winch
General:
Specifications:
- Model: 40 STE Standard Compact Electric Above Deck
- Manual Speeds: Two
- Electric Speeds: Variable
- Drum Diameter (D): 2-15/16" (75 mm)
- Base Diameter (B): 6" (152 mm)
- Height (H): 6-7/8" (174 mm)
- Line Entry (L): 6-3/16" (157 mm)
- Line Size: 5/16"-9/16" (8-14 mm)
- Weight: 37.48lbs (17kg)
- Maximum Deck Thickness (K): 1-3/4" (45 mm)
- Motor Height (J): 3-3/8" (86 mm)
- Motor Diameter(S): 7-7/8" (200 mm)
- Motor Depth (U): 1-19/32" - 2-31/32" (40 mm - 75 mm)
- Voltage: 12
Product Literature:
Note: Full stainless and 24 volt models available by special order.
WARNING: This product MAY expose you to chemicals, which are known to the State of California to cause cancer, birth defects and/or other reproductive harm. For more information go to www.p65warnings.ca.gov
Documentation available at the following links:
Lewmar Winch Grease
Item #: 606875Highly Waterproof Grease and Contains Solid Activation
Applications: Winches, Wheel Bearings, Steering Gears and Hydraulic Equipment
Container: 100 gram Tube
Item #: 606875
Include
$15.29
Model #:
19701000
Model #:
19701000
Andersen Winch Service Kit 1
Item #: 612042Applications: 12ST, 28ST, 40ST, 40ST FS Self Tailing Winches (Pre-2007)
Includes: Pawls, Springs, Circlips and more*
Andersen Recommends Servicing Winches Every 2-Years with Typical Use
Item #: 612042
Include
$35.09
Model #:
RA710001
$35.09
Model #:
RA710001
Lewmar Winch Handle Holder
Item #: 612531Designed for Standard 10" Winch Handles
Height: 10", Bottom Width: 2-7/8", Top Width: 3-3/4"
Material: PVC, Color: White
Item #: 612531
Include
$15.29
Model #:
29140020
Model #:
29140020
Lewmar Primary Floating Winch Handle -10"
Item #: 612549Handle Length: 10" Locking, Grip Type: Standard Single
Material: High Grade Injection Molded Glass Nylon, Color: Red with Black Grip
Ultrasonically Welded Creating a Box Section for Strength and Stiffness
Item #: 612549
Include
$44.99
Model #:
29145311
$44.99
Model #:
29145311
Andersen Winch Replacement Disc Spring
Item #: 615386Applications: Anderson 40ST Self-Tailing Manual Winches
Includes: Disc Spring
Dimensions: O.D. 4.25", I.D. 2.36", Sold (1) per Package
Item #: 615386
Include
$22.49
Model #:
RA535500
$22.49
Model #:
RA535500