Defender Home Page
Call or email to speak with our In-House Technical Staff/Advisors
Phone: 800-628-8225 Int'l.: 860-701-3400 Email: Contact Us
Follow us on Facebook
Shipping Info
Defender Home Page
Your Cart
null
null
null View Cart View Shopping Cart
null Check My Order(s)
null Track My Package(s)
Metric/Inch
Conversion Chart
Categories
Shopping Areas
Information
Boats & Motors
null Defender Seal null
promo A
promo B
promo C
promo D
 
 

Turning Point MasterTorque Propeller Hub System

  • For Nissan / Tohatsu and Yamaha Engines 40 - 300+ HP
  • With 4-3/4" or 4-1/4" Gearcases, Prop Shaft Splines: 15
  • For Legacy, Patriot and Voyager Propellers
  • Item #: 
    304638
    Brand: 
    Turning Point
    Model #: 

    505

    Packaged Weight: 
    1.80 Lbs.
    Our Price:
    $38.99
    304638 Turning Point Turning Point MasterTorque Propeller Hub System 505

    Model 505 Applications: Nissan and Tohatsu : 60C, 70C / 90 hp to 140 hp / Yamaha : 2-stroke: 115 hp to 130 hp / 4-stroke: 115 hp / Yamaha :150 to 250 hp outboards / stern drives 3.0 to 7.4L (See Attached Guide for Complete Hub and Prop Information)

    The MasterTORQUE™ Hub System is a compatible upgrade to Michigan Wheel® XHS®, Mercury® Flo Torq® and other similar hub systems. MasterTORQUE™ advanced designs overcome the shortcomings of competitive hubs and are offered in our Legacy, Patriot, and Voyager propeller lines.

    The MasterTORQUE™ Hub System Features:

    • Shock absorbing hi-tech polymer cushion absorbs damaging shift shock vibrations
    • Reinforced for dependability and ensures trouble free boating
    • Innovative one piece design is easy to install and eliminates rattling
    • Solid brass spindle will not corrode

    Turning Point Hub System General Features:

    • Hubs Interchange with other manufacturers’ propellers
      • Upgrades and replaces Mercury®’s Flo-Torq® and Michigan Wheel®’s XHS™ hub kit systems.
    • Easy to Install: Consumer Friendly Clear and easy step by step directions coupled with minimal parts makes installation easy
    • Increases Performance and HP: High-flow through barrel exhaust system maximizes exhaust flow increasing horsepower and top end speed.
    • Adapts to Almost All Engine Applications: Interchangeable w/ 8hp to 300+hp Props adapting to almost all outboard and sterndrive applications.
    • Eliminate Hub System Vibration & Chatter: Innovative one-piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems
    • Reduces Gear Shock & Engine / Drive Damage Shock with an absorbing hi-tech polymer cushion.
    • Corrosion Resistant Materials: Premium corrosion resistance Brass splines
    • Reduce Prop Replacement Cost by 20-30%: Hub kits are designed to be reusable even after most propeller impacts, eliminating the need to replace the hub system when replacing a damaged propeller.
    • Eliminate Hub Cracking & Failure: The glass reinforced high-tech polymer construction increases flexibilty, eliminating potential material stress fractures.
    • Never Buy Another Hub Kit: Limited Life Time Warranty
     
    Turning Point MasterTorque Propeller Hub System
    38.99
    Status:  null In Stock

     

    shipping delay

     

    Click here for a propeller selection guide


    Model 505 Applications: Nissan and Tohatsu : 60C, 70C / 90 hp to 140 hp / Yamaha : 2-stroke: 115 hp to 130 hp / 4-stroke: 115 hp / Yamaha :150 to 250 hp outboards / stern drives 3.0 to 7.4L (See Attached Guide for Complete Hub and Prop Information)

    The MasterTORQUE™ Hub System is a compatible upgrade to Michigan Wheel® XHS®, Mercury® Flo Torq® and other similar hub systems. MasterTORQUE™ advanced designs overcome the shortcomings of competitive hubs and are offered in our Legacy, Patriot, and Voyager propeller lines.

    The MasterTORQUE™ Hub System Features:

    • Shock absorbing hi-tech polymer cushion absorbs damaging shift shock vibrations
    • Reinforced for dependability and ensures trouble free boating
    • Innovative one piece design is easy to install and eliminates rattling
    • Solid brass spindle will not corrode

    Turning Point Hub System General Features:

    • Hubs Interchange with other manufacturers’ propellers
      • Upgrades and replaces Mercury®’s Flo-Torq® and Michigan Wheel®’s XHS™ hub kit systems.
    • Easy to Install: Consumer Friendly Clear and easy step by step directions coupled with minimal parts makes installation easy
    • Increases Performance and HP: High-flow through barrel exhaust system maximizes exhaust flow increasing horsepower and top end speed.
    • Adapts to Almost All Engine Applications: Interchangeable w/ 8hp to 300+hp Props adapting to almost all outboard and sterndrive applications.
    • Eliminate Hub System Vibration & Chatter: Innovative one-piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems
    • Reduces Gear Shock & Engine / Drive Damage Shock with an absorbing hi-tech polymer cushion.
    • Corrosion Resistant Materials: Premium corrosion resistance Brass splines
    • Reduce Prop Replacement Cost by 20-30%: Hub kits are designed to be reusable even after most propeller impacts, eliminating the need to replace the hub system when replacing a damaged propeller.
    • Eliminate Hub Cracking & Failure: The glass reinforced high-tech polymer construction increases flexibilty, eliminating potential material stress fractures.
    • Never Buy Another Hub Kit: Limited Life Time Warranty
     
     
     

    Turning Point MasterTorque Propeller Hub System
    Item #: 304641
  • For Evinrude / Johnson Engines 40 - 300+ HP
  • With 4-3/4" or 4-1/4" Gearcases, Prop Shaft Splines: 13
  • For Legacy, Patriot and Voyager Propellers
  •  
    null
    Our Price: $38.99
    Model #:
    503
    Turning Point Legacy 3-Blade Aluminum Propeller
    Item #: 304652
  • Diameter: 14" x Pitch: 13 RH
  • Applications: 40 - 150 Hp / Gearcase: 4-1/4"
  • Each Brand/Model of Outboard Requires a Specific Hub Kit (Sold Separately)
  •  
    null
    Our Price: $77.99
    Model #:
    LE-1413
    Turning Point Legacy 3-Blade Aluminum Propeller
    Item #: 304653
  • Diameter: 13-3/4" x Pitch: 15 RH
  • Applications: 40 - 150 Hp / Gearcase: 4-1/4"
  • Each Brand/Model of Outboard Requires a Specific Hub Kit (Sold Separately)
  •  
    null
    Our Price: $77.99
    Model #:
    LE-1315
    Turning Point Legacy 3-Blade Aluminum Propeller
    Item #: 304655
  • Diameter: 13-1/4" x Pitch: 19 RH
  • Applications: 40 - 150 Hp / Gearcase: 4-1/4"
  • Each Brand/Model of Outboard Requires a Specific Hub Kit (Sold Separately)
  •  
    null
    Our Price: $77.99
    Model #:
    LE-1319
    Turning Point Legacy 3-Blade Aluminum Propeller
    Item #: 304656
  • Diameter: 13-1/4" x Pitch: 21 RH
  • Applications: 40 - 150 Hp / Gearcase: 4-1/4"
  • Each Brand/Model of Outboard Requires a Specific Hub Kit (Sold Separately)
  •  
    null
    Our Price: $77.99
    Model #:
    LE-1321
    Turning Point Legacy 3-Blade Aluminum Propeller
    Item #: 304657
  • Diameter: 15-1/4" x Pitch: 15 RH
  • Applications: 135 - 300 Hp / Gearcase: 4-3/4"
  • Each Brand/Model of Outboard Requires a Specific Hub Kit (Sold Separately)
  •  
    null
    Our Price: $80.99
    Model #:
    LE-1515
    Turning Point LE-1417 Hustler 3-Blade Aluminum Propeller
    Item #: 304658
  • Diameter: 14-1/4" x Pitch: 17 RH
  • Applications: 135 - 300 Hp / Gearcase: 4-3/4"
  • Each Brand/Model of Outboard Requires a Specific Hub Kit (Sold Separately)
  •  
    null
    Our Price: $80.99
    Model #:
    21501711
    Turning Point Legacy 3-Blade Aluminum Propeller
    Item #: 304659
  • Diameter: 14-1/4" x Pitch: 19 RH
  • Applications: 135 - 300 Hp / Gearcase: 4-3/4"
  • Each Brand/Model of Outboard Requires a Specific Hub Kit (Sold Separately)
  •  
    null
    Our Price: $80.99
    Model #:
    LE-1419
    Turning Point Legacy 3-Blade Aluminum Propeller
    Item #: 304660
  • Diameter: 14-1/4" x Pitch: 21 RH
  • Applications: 135 - 300 Hp / Gearcase: 4-3/4"
  • Each Brand/Model of Outboard Requires a Specific Hub Kit (Sold Separately)
  •  
    null
    Our Price: $80.99
    Model #:
    LE-1421
    Turning Point Legacy 3-Blade Aluminum Propeller
    Item #: 304661
  • Diameter: 14-1/4" x Pitch: 23 RH
  • Applications: 135 - 300 Hp / Gearcase: 4-3/4"
  • Each Brand/Model of Outboard Requires a Specific Hub Kit (Sold Separately)
  •  
    null
    Our Price: $80.99
    Model #:
    LE-1423
    Turning Point Hustler Mid-Range Aluminum 4-Blade Propeller
    Item #: 300694
  • Diameter: 14" x Pitch: 17 RH
  • Applications: 135-300 hp, 4-3/4 Inch Gearcase
  • Each Brand/Model of Outboard Requires a Specific Hub Kit (Sold Separately)
  •  
    null
    Our Price: $87.99
    Model #:
    2150 1730
    Pettit Alumaspray Plus Aerosol Antifouling Paint
    Item #: 755305
  • For use on aluminum outdrives and outboard motors
  • Advanced Self-Cleaning Formula Offers Superior Slime Resistance
  • Size: 12 oz., Color: Black
  •  
    null
    Our Price: $33.99
    Model #:
    1863
     
     
     

    Have A Suggestion?


    This form is intended to improve the current product page. For Customer Service, please click here

    Help us make our site better for everyone! Let us know you've found something wrong or frustrating on this page and we will improve it. Please mark each that apply.










    Comments or Examples:
    Examples: Missing information such as dimensions and model number, typos, inaccuracies, etc...

                





           
    Defender Email Specials
    Click Here For Our Privacy Policy
     
    null