Marinco ConnectPro Watertight Trolling Motor Outlet Wire Adapter

Features:

• The Marinco 12VBRAD Trolling Motor Receptacle Adapter allows for 6 gauge wire connection to ConnectPro receptacle
  • ConnectPro System Accepts 16 to 8 gauge wire, without this Adapter
• Corrosion resistant, plated brass electrical components
• Easy To Install
• The superior electric current carrying capacity of the ConnectPro system eliminates problems that rob motors of power and reduce battery life
• The ConnectPro System features locking plug and receptacle and spring clamping connection which provides a secure, superior electrical connection for trolling motors
  • Matching ConnectPro Plug and Receptacle Sold Separately
  • ConnectPro Trolling Motor System is a revolutionary concept in trolling motor DC connections
  • Marinco's Exclusive Locking Plug and Receptacle provide capacity that eliminates problems that rob motors of power and reduce battery life
  • The ConnectPro system features locking plug and receptacle and spring clamping connection which provides a secure, superior electrical connection for trolling motors.

1. Strip the battery wires 1/2". If necessary, cut back the wires until clean wire is uncovered
2. Do NOT solder the ends of the wires
3. Insert the negative wire into terminal #1 and the positive wire into terminal #2. (For three-wire systems (either 12/24 or 24/36V) insert the highest voltage wire into terminal #3)
4. Make certain there is no wire insulation inside the terminals, and there are no stray wire strands outside the terminals
5. Tighten the terminal screws to 18-20 in-lbs torque (Do not overtighten)
6. Install the adapter to receptacle
7. Make certain adapter terminals marked "1," "2," and "3" match the corresponding receptacle terminals marked "1," "2," and "3" on the receptacle
8. Tighten the receptacle terminal screws to 12 in-lbs torque (Do not overtighten)