Furuno GP33 GPS Navigator

Dont worry about losing your Loran locations, simply plug your saved TD numbers into the new GP33 and youll be on your way!

While always easy to use, all GP3x series models have also delivered a tremendous array of features and effortless customization capabilities, making it the number one choice for boaters desiring a full-featured GPS Navigator, without the necessity for a full-blown Chart Plotter. The GP33 carries forward the established tradition of simplified operation and straightforward customization, as well as integrating today's outstanding color display and graphics technology, delivering the most attractive, uncomplicated, and economical GPS Navigator available on the market today. The GP33 is also the only dedicated GPS Navigator that does not require running an NMEA 2000 backbone cable to a vessel's mast. This uniquely prevents exposure of the vessel's critical NMEA 2000 backbone to potentially dangerous weather and lightning conditions.

General Features:

• Compact in size, yet big on features and performance, the FURUNO GP33 is the perfect GPS navigator for a wide range of vessels. This advanced unit provides accurate and reliable position fixing, thanks to a super sensitive, 12-channel GPS receiver combined with integrated WAAS technology.
• The GP33 displays navigation data in a wide variety of numerical and graphical formats. You may freely select which data you want displayed with easy to use controls. The combination of a high resolution screen and large data fields makes the screen easy to read in almost any condition.
• The GP33 has a waterproof display and is built to stand up to tough marine conditions. The durable casing houses an impressive memory, capable of storing up to 3,000 points of ship’s track, 10,000 points for marks and waypoints, and 100 routes of up to 30 waypoints each. Vital navigation data is presented on a 4.3" color LCD.
• The GP33 features FURUNO’s CAN bus interface system for feeding highly accurate navigation data to your NavNet 3D, radar, chart plotter, autopilot, fish finder or other navigation equipment. CAN bus is a communication protocol that shares multiple data and signals through a single backbone cable. You can simply connect any CAN bus devices onto the backbone cable to expand your network onboard. With CAN bus, IDs are assigned to all the devices, and the status of each sensor in the network can be detected. All the CAN bus devices can be incorporated into the NMEA 2000 network, offering easy plug-and-play installation. NMEA 0183 protocol versions are also supported.

Features:

• 4.3 Inch Vivid color, high resolution (WQVGA) waterproof display
• Sunlight viewable, 700cd display, utilizing high-efficiency LED backlighting
• (12) parallel channel GPS receiver with 2 additional dedicated WAAS/SBAS channels
• (7) display modes with 2 customizable modes, including plotter, L/L, highway, compass ribbon
• Fully NMEA 2000 certified with dual 12 Volt / 24 Volt DC, NMEA 2000 (Furuno CANBUS) voltage capability
• Integrated NMEA 0183 & RS232 ports (simultaneous usage with NMEA 2000 port)
• 10,000 waypoints / mark storage with 100 routes and 3000 track points
• Contact closure input / external alarm output for external MOB pendant systems, external event switch input, or external alarm contact trigger output
• Standard adjustable mounting bracket or flush mounting options with 10mm console stand-off height
• Standard Furuno hi-gain pre-amplified GPS antenna with attached 10m cable
• Standard 6m power / NMEA 2000 (Furuno CANBUS) cable
• Optional "Cover-Up" Bezel for simple, clean retrofit of previous GP3x displays (Purchased Separately)

WARNING: This product MAY expose you to chemicals, which are known to the State of California to cause cancer, birth defects and/or other reproductive harm. For more information go to www.p65warnings.ca.gov