Defender Home Page
Phone: 800-628-8225 Fax: 800-654-1616 Int'l.: 860-701-3400 Email: Contact Us
follow me on facebook
Shipping Info
no sales tax Defender Home Page
Your Cart


View Cart View Shopping Cart
Check My Order(s)
Track My Package(s)
Metric/Inch
Conversion Chart
Categories
Shopping Areas
Information
Boats & Motors
 Defender Seal
 
Nauta Heavy Duty Holding / Diesel Fuel Tank - 37 Gallon
Get Up to $40 Back via Instant Rebate when you purchase a select Nauta flexible tank. This item is eligible for a $30 rebate. Hurry - Offer ends 5/1/2018. Your Instant Rebate will display in the Payment page of your cart.
 

Nauta Heavy Duty Holding / Diesel Fuel Tank - 37 Gallon

  • Capacity: 37 Gallons (140 liter)
  • Material: Neoprene / Nitrile, Tedlar Lining, Flat: 27" x 46"
  • Fittings are not Included (Purchased Separately), Includes Spanner Wrench
  • Item #: 
    500607
    Brand: 
    Nauta
    Model #: 
    FT915160
    Shipping Weight: 
    3.00 Lbs.
    List Price: 
    $550.00
    Our Price:
    $454.99
    454.99
    Status:      In Stock

    Quantity:  
     

    See a Product Data Sheet

    See Product Catalog

    The Nauta model FT915160 tank can be used as a Holding tank or Diesel Fuel tank. This tank is not intended for use with gasoline. There are no fittings included with this tank. Fittings are required and can be purchased separately. The size and type of fittings should be determined by your use of the tank. You can purchase, locate and install the fittings according to your needs. A spanner wrench (FTP010) is included with this tank and is designed for fitting installation, removal and relocation.

    Diesel Fuel Storage Tank: NAUTA® flexible diesel tanks can dramatically extend the range of powered sail and motor boats. They can be deck or cockpit mounted to gravity feed (or be hand-pumped) to tankage below decks. And, when empty, these tanks can be rolled up and stowed. Sport and commercial fishermen heading into offshore waters and cruisers visiting remote ports (where refueling may be unavailable or of suspect quality) will find these NAUTA® tanks an ideal, low cost solution.

    Waste Storage Holding Tank: The more rigorously enforced laws against overboard discharge now make non-compliance extremely costly. A NAUTA® flexible holding tank, on the other hand, provides a relatively inexpensive Type III solution. In addition, the Teldar™ lining of these NAUTA® tanks prevents gas permeation, thus stopping a major odor problem associated with many other holding tanks. Combined with a few other components, this solution is both legal and far less costly than re-plumbing a vessel or installing a more complex and expensive Type I or Type II system. These tanks occupy less space and requires no electrical power. 1 Year warranty coverage

    Nauta model FT915160 Specifications:

    • Maximum Capacity: 37 gallon (140 liter)
      • Stated capacities are given for optimum expanding conditions (a flexible tank conforms to and is limited by the space in which it is mounted).
    • Flat Dimensions: 27 x 46" (67 x 117 cm)
      • Dimensions are for empty tanks
      • When the tanks are mounted horizontally and filled, these dimensions reduce by 10% to 15%
      • The filled depth (highest to lowest point) ranges from 12" to 16", depending on tank size
    • Tank Material: 935-Dtex nylon fabric
      • Coated on both sides with a neoprene / nitrile compound
    • Note: This model does not include required fittings (Fittings can be Purchased Separately)
      • The size and type of fittings should be determined by your use of the tank
      • You can purchase, locate and install the fittings according to your needs
      • The Factory installed Center Cleanout Fitting with Threaded Cap does not accept any standard fittings
      • A spanner wrench (FTP010) is included with this tank and is designed for fitting installation, removal and relocation
    • Warranty: 1 Year

    General Nauta Tank Features:

    • Each Nauta tank uses an extremely rugged 935-dtex nylon fabric
      • Coated on both sides with a neoprene / nitrile compound
      • Heavily lapped seams are inside-reinforced with a "doubler" to provide extra strength
    • All NAUTA® tanks are vulcanized to assure leak proof panels and seams for years of trouble-free service
    • Because of their flexibility, these tanks can fit into almost any space, especially those odd-shaped places that would otherwise be wasted
    • NAUTA® tanks are very easy to work with
    • Some tanks used for water and holding are available with fittings already installed
      • NAUTA®'s construction also allows custom placement of fittings to suit your particular requirements and makes it simple to install them
    • All are covered by warranty
     
    WARNING: This product MAY expose you to chemicals, which are known to the State of California to cause cancer, birth defects and/or other reproductive harm. For more information go to www.p65warnings.ca.gov



      


    Nauta Flexible Fresh Water Tank - 35.5 Gallons
    Item #: 500223
  • Capacity: 35.5 Gallons, Flat Dimensions: 26-1/2" x 45-1/2"
  • Orientation: Horizontal, Material: Tedlar Lining for Taste-Free System
  • Includes Fittings, Requires (1) Optional Drawing Nipple (Sold Separately)
  •  Include

    $324.99
    Model #:
    FT911167
    Nauta Flexible Tank Fill Fitting
    Item #: 500608
  • Applications: Nauta Flexible Water, Waste and Fuel Tanks
  • Orientation: 90 Degree, Color: Black
  • Hose Barb: 1-1/2"
  •  Include

    $31.99
    Model #:
    FTP2221
    Nauta Flexible Tank Fill Fitting
    Item #: 500609
  • Applications: Nauta Flexible Water, Waste and Fuel Tanks
  • Orientation: Straight, Color: Black
  • Hose Barb: 1-1/2"
  •  Include

    $11.49
    Model #:
    FTP1210
    Nauta Flexible Tank Vent Fitting
    Item #: 500612
  • Applications: Nauta Flexible Water, Waste and Fuel Tanks
  • Orientation: Straight, Color: Black
  • Hose Barb: 5/8"
  •  Include

    $12.99
    Model #:
    FTPE300
    Nauta Heavy Duty Holding / Diesel Fuel Tank - 52.5 Gallons
    Item #: 300087
  • Capacity: 52.5 Gallons (198 liter)
  • Material: Neoprene / Nitrile, Tedlar Lining, Flat: 27" x 63"
  • Fittings are not Included (Purchased Separately), Includes Spanner Wrench
  •  Include

    $599.99
    Model #:
    FT915180
     
     
     

    Have A Suggestion?


    Help us make our site better for everyone! Let us know you've found something wrong or frustrating on this page and we will improve it. Please mark each that apply.

    Product has been improperly categorized
    Page loads too slowly
    Product information is incorrect
    Page has errors or bugs
    Site is frustrating or difficult to use
    Product image is missing or wrong
    Cannot find my size
    Spelling errors on page
    Not enough product information

    Comments or Examples:
    Examples: Missing information such as dimensions and model number, typos, inaccuracies, etc...

    Please include your e-mail address below if you would like us to respond to your comments or questions.             





       
    Join Our Email List And Receive our Monthly Promotions
    Defender Email Specials