Lewmar H2 Gypsy / Drum Horizontal Windlass Kit
Important Note: A 32 mm nut wrench is no longer provided with Lewmar windlass kits
The stylish, horizontal Lewmar H-Series Windlass uses reliable worm gearbox technology. The integral contactor simplifies wiring and is protected by a durable maincase. The unit's waterproof seal requires minimum maintenance.
The electro-polished stainless steel rode management system will handle both rope and chain, while the manual recovery module means that the anchor can be recovered even in the event of a power failure. Dual direction operation gives total control when both raising and lowering.
Kit includes: Built-in-dual-direction contactor, breaker and rocker switch
The key features of Horizontal Windlasses are:
- Most of the windlass unit is on the deck
- Easy installation
- Good for boats with small anchor lockers
- Anchor rode enters the gypsy and makes 90 turn and feeds into the anchor locker
- Minimum fall of 304mm (12") is recommended in order to have enough gravity to pull the rode down into the locker
|Gypsy No||Power Option||Motor Watts||Typical Max Pull (lb)||Max line Speed/min (ft)||Typical Working Load (lb)|
|Normal Current Draw||Normal Line Speed/min (ft)||Weight Gypsy/Drum (lb)||Circuit Breaker (Slow Blow)|
|Chain Description||Rope G Description (in)|
|5/16" BB, 5/16" US G4, ISO, 8mm DIN766, 8mm ISO 4565|| 14-16mm 3-strand and |
8-plait (5/8 only)
Note: Lewmar products are designed for use in recreational marine applications. Any commercial application is forbidden without the prior approval of Lewmar engineering and management.
Item #: 002736
Item #: 011904
Item #: 001658
Item #: 001659
Item #: 602381