Defender Home Page
Phone: 800-628-8225 Fax: 800-654-1616 Int'l.: 860-701-3400 Email: Contact Us
Shipping Info
no sales tax Defender Home Page
Your Cart

View Cart View Shopping Cart
Check My Order(s)
Track My Package(s)
Conversion Chart
Shopping Areas
Boats & Motors
 Defender Seal
Maretron Pressure Transducer

Maretron Pressure Transducer

  • O TO 5000 PSI
  • For Use with the Maretron FPM100 Fluid Pressure Module
  • Item #: 
    Model #: 
    Shipping Weight: 
    1.00 Lbs.
    List Price: 
    Our Price:
    Status:      In Stock



    Maretron pressure transducer to be used with the FPM100

    For maximum accuracy, you should always use the transducer with the smallest range that is sufficient for your application

    All pressure transducer accessories for the FPM100 are fitted with 1/4” NPT male threads.

    Some pressure transducers measure gage pressure (pressure above atmospheric). These transducers have a small plastic vent tube enclosed in the connecting cable. Special care must be taken not to block or kink the vent tube, and not to expose the vent tube to moisture.

    Keep in mind that the rated burst pressure of the pressure transducer is 2.4 to 3 times the maximum measurement pressure of the transducer. If the pressure transducer will experience pressure spikes in excess of the transducer’s maximum measurement pressure, use of a Pressure Snubber (PT-SNUB-01) accessory is highly recommended. The snubber will dampen pressure spikes that will be seen by the pressure transducer.


    • 0-5000 PSI
    • Operating Temperature: -40°C to 105°C
    • Storage Temperature: -40°C to 105°C
    • Proof Pressure: 2.4 × Full Scale
    • Burst Pressure: 2.4 × Full Scale
    • Reverse Voltage Protection:± 16V over 5 Minutes
    • Construction: 304L stainless steel
    • Pressure/Temperature Cycles: 0 to FS @ 8Hz; and –40°C to 105°C for > 1.8x106 cycles
    • Thermal Shock: 105°C to –40°C, 0.5 hr soaks at Temp. (2s Transfer) for 300 cycles
    • Vibration: 100 to 2000 Hz, 20g Sinusoidal, 3 Axes for 144 hours
    • EMC Compatibility: 10 Volts/meter per EN 61000-4-3
    • Humidity: 85°C and
    WARNING: This product MAY expose you to chemicals, which are known to the State of California to cause cancer, birth defects and/or other reproductive harm. For more information go to

    Maretron Pressure Transducer
    Item #: 258672
  • Choose Range
  • For use with the Maretron FPM100 Fluid Pressure Module

    Model #:

    Have A Suggestion?

    Help us make our site better for everyone! Let us know you've found something wrong or frustrating on this page and we will improve it. Please mark each that apply.

    Product has been improperly categorized
    Page loads too slowly
    Product information is incorrect
    Page has errors or bugs
    Site is frustrating or difficult to use
    Product image is missing or wrong
    Cannot find my size
    Spelling errors on page
    Not enough product information

    Comments or Examples:
    Examples: Missing information such as dimensions and model number, typos, inaccuracies, etc...

    Please include your e-mail address below if you would like us to respond to your comments or questions.             

    Join Our Email List And Receive our Monthly Promotions
    Defender Email Specials