B&G Broadband 3G Radar
Shipping weight reflects calculated Dimensional Weight and is not actual product weight - see here for details.
- AA010189 Radar Interface box
- 000-0127-51 Ethernet Cable (6 feet)
- AA010212 Scanner Cable (66 feet)
Broadband 3G™ Radar. Unrivaled target separation and detection near and farther – with 30% more range.
Unparalleled Short Range Target Discrimination — Where it Matters Most
B&G's Broadband 3G™ Radar provides amazing target resolution, even at an unprecedented 1/32 nm range. Docks, channel markers, moored vessels and other critical targets are displayed with clarity and separation, for added confidence in close quarters. Broadband Radar™ technology also eliminates the "main bang" of a pulse radar — the obscured "dead zone" immediately around the vessel — which interferes with close target detection.
30% More Range
Broadband 3G™ Radar allows you to see more targets further away from your boat. Now you get the same impressive short-range capabilities of the original Broadband Radar with the addition of exposing targets previously unseen before.
lowest RF Transmission for Safe, Flexible Installation
B&G's Broadband Radar™ transmits at 1/10,000 the power of typical pulse radars, emitting 5-times less energy than an average cell phone! So, Broadband 3G™ Radar is safe to mount in locations never before possible. Plus, with the lowest DC power draw of any X-band marine radar, it's the first and only radar ideally suited for sailboats with limited power.
Navigation in an Instant
No more waiting 2-3 minutes for a magnetron to warm up - 100% solid-state design provides InstantOn™ capability. When darkness falls or the fog rolls in, you will always be ready. Ideal for sailboats wishing to save power, or boats at anchor not wishing to run the radar continuously.
B&G Zeus Displays
|Antenna Beam Width Horizontal||5.2°+/-10% (-3dB width) °|
|Antenna Beam Width Vertical||25°+/-20% (-3dB width) °|
|Antenna Receiver Noise Figure||6 dB|
|Antenna Rotation Speed||24/36 rpm +/- 10% RPMs|
|Radar Warm Up Time||0 min|
|Radar Wind Resistance||51 m/sec (Max:100 Knots)|
|Transmitter Frequency||X-band - 9.3 to 9.4GHz|
|Transmitter Power Output||165mW nominal|
|Data I/O Protocol||High Speed Ethernet|
|Mounting||Bolts: 4x30xM8 - 304 stainless steel|
|Height||11 in \ 280 mm|
|Diameter||19.2 in \ 488 mm|
|Weight||16.31 lbs \ 7.4 kg|
|Humidity||+95°F/+35°C, 95% RH|
|Operating Temperature||-13° to +131°F/-25° to +55°C|
|Power Supply||9 to 31.2vDC (12/24 Volt systems) Reverse polarity protection vice|
|Power Consumption||18W (Typ.) @ 13.8vDC|
|Power Consumption Standby||2W(Typ.) @ 13.8vDC~ only 150ma|
|Interconnection Cable||20m (65ft) standard with RJ45 thin custom (Max 30m)|
|Interface Heading||SimNet or NMEA 0183 with cable kit into display|
Scanstrut SC101 Radome Pole System Kit
Item #: 260399
Item #: 258954
Scanstrut Radome / Satcom Mast Mount
Item #: 257640