Jabsco Oil Changer with Multi-Valve Manifold
Defender Home Page
Phone: 800-628-8225 Fax: 800-654-1616 Int'l.: 860-701-3400 Email: Contact Us
Shipping Info
no sales tax Defender Home Page
Your Cart

View Cart View Shopping Cart
Check My Order(s)
Track My Package(s)
Conversion Chart
Shopping Areas
Boats & Motors
 Defender Seal

Jabsco Oil Changer with Multi-Valve Manifold

  • Designed to be Permanently Mounted in a Vessel's Engine Room
  • Manifold: (3) Ball Valves to Serve (3) Different Oil Reservoirs
  • Power: 12 Volts (Draw: 15 Amps) or 24 Volts (Draw: 8 Amps), Select Power
  • Item #: 
    Model #: 
    Multiple Models Available
    Shipping Weight: 
    11.00 Lbs.
    Reg. Price:
    Sale Price:
    Please enter quantity below.


    Model #
    12 VDC
    Reg. Price: $520.99
    Sale Price: $416.79
    24 VDC
    Reg. Price: $520.99
    Sale Price: $416.79
    Click the "More Info" button above for specific information about that product.

    Available Models:

    Model: 17820-0024 (24 Volt DC)

    Model: 17820-0012 (12 Volt DC)


    • The Jabsco Oil Change System is designed to be installed in a vessel’s engine room with its manifold and valves permanently plumbed to the vessel’s engines’ oil pans or transmissions’ oil sumps
    • The manifold is factory fitted with (3) Ball Valves to serve three different oil reservoirs
      • May be fitted with (2) Additional Ball Valves to drain up to (5) oil reservoirs
    • The system can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission
    • Each connection to an engine is controlled by a dedicated full flow ball valve
    • The system’s cover provides an attractive appearance, fully shrouding the entire pump and manifold system
    • It also provides added protection against accidental draining of an engine’s oil supply because the valve cover protects the factory supplied valves from being accidentally bumped open
    • Additionally, at the end of an oil change, the cover will not close unless the factory supplied valves are in the fully closed position


    • Body: Bronze
    • Impeller: Nitrile
    • Seal: Buna Lip Type
    • Motor: Reversible Permanent Magnet With Integral Reversing Switch
    • Complies with USCG 183.410 and ISO 8846 MARINE (ignition protected)
    • Valves: 1/2" NPT Full Flow Ball Type
    • Height: 6-1/4" (15.9 cm) Including the height of the 1-1/8" (30 cm) tall Switch Guards
    • Length: 10-7/8" (27.6 cm)
    • Width: 10-3/16" (26.0 cm)
    • Available Models:
      • 17820-0024 - 24 Volts, Draw: 8 Amps
      • 17820-0012 - 12 Volts, Draw: 15 Amps
    WARNING: This product MAY expose you to chemicals, which are known to the State of California to cause cancer, birth defects and/or other reproductive harm. For more information go to www.p65warnings.ca.gov


    Documentation available at the following links:


    Have A Suggestion?

    Help us make our site better for everyone! Let us know you've found something wrong or frustrating on this page and we will improve it. Please mark each that apply.

    Product has been improperly categorized
    Page loads too slowly
    Product information is incorrect
    Page has errors or bugs
    Site is frustrating or difficult to use
    Product image is missing or wrong
    Cannot find my size
    Spelling errors on page
    Not enough product information

    Comments or Examples:
    Examples: Missing information such as dimensions and model number, typos, inaccuracies, etc...

    Please include your e-mail address below if you would like us to respond to your comments or questions.             

    Join Our Email List And Receive our Monthly Promotions
    Defender Email Specials