Keyword Or Item #
Raymarine EV-1 Sensor Core
In Stock
At the center of every Evolution system is the intelligent Evolution EV Sensor Core , a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing, eliminating the need for complicated set up and calibration. Once Evolution is installed, getting started is as easy as switching the autopilot on. Thanks to the intelligent EV sensor core, the autopilot automatically evolves and adapts to your vessel's steering characteristics without any user adjustments.
The EV-1 Sensor Core is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalk ng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalk ng and NMEA 2000 networks. Mount the EV-1 sensor core above or below decks; the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.
Features of the EV-1:
- Precision monitoring of heading, pitch, roll, and yaw
- Allows the autopilot to evolve instantly as sea conditions and vessel dynamics change
- Flexible installation options
- Mount above or below your deck
- Simple SeaTalk ng connectivity to the control head and ACU
- Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions
- Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes
- Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays
Specifications:
| EV-1 Sensor Core | |||
| Nominal Supply Voltage (volts DC) | 12 Volt DC systems | ||
| Operating Voltage Range (volts DC) | 10.8 – 15.6 Volts DC | ||
| Power Consumption | 30 mA | ||
| SeaTalk ng LEN | 1 | ||
| Sensors | 3-Axis digital | ||
| Data Connections | SeaTalk ng | ||
| Operating Temperature | -20ºC to +55ºC | ||
| Storage Temperature | -30ºC to +70ºC | ||
| Relative Humidity | max 93% | ||
| Waterproof Rating | IPX 6 | ||
| Dimensions | 140mm Diameter, 35mm Depth (incl. mounting enclosure), 95mm Depth (incl. wall bracket) | ||
| Weight | 0.29 kg (0.64 lbs) | ||
| EMC Compliance | Europe: 2004/108/EC, Australia and New Zealand | ||
Note: Evolution Autopilots communicate via SeaTalk ng . A SeaTalk ng to NMEA Converter Kit ( E22158 ) may be required to connect older Raymarine or Non-Raymarine Displays. Raymarine Software version 1.21 is also a minimum requirement.
