Cart   null      null
Track Orders
Customer Service
My Account
Logo linked to Defender Homepage
Important message
Call or email to speak with our in-house knowledgeable staff.
Phone: 800-628-8225 | Int'l.: 860-701-3400 | Email: Contact Us
promo A
promo B
promo C
promo D
 

Shaft Shark 300 Line and Weed Cutter

  • Keep your Prop Free from Rope, Weeds and Underwater Debris
  • Overall Diam.: 3.2", Split Design - No Prop Removal Required to Install
  • Shaft Diameter: 1.00"
  • Item #: 
    614768SPV01I
    Brand: 
    Shaft Shark
    Model #: 

    SS300-1

    Packaged Weight: 
    0.70 Lbs.
    List Price: 
    $492.00
    Our Price:
    $399.99
    614768SPV01I Shaft Shark Shaft Shark 300 Line and Weed Cutter SS300-1

    The Shaft Shark is a serrated edge disc, machined from high quality type 316 stainless steel. The internal diameter is machined to fit the shaft diameter of your boat - either metric or standard. Attached to your propeller shaft, it rotates with the shaft, cutting anything that might try to become entangled around your shaft and prop. Shark Shaft cuts through lines, nets and other underwater debris as soon as it catches.

    Features:

    • Keeps your propeller free from rope, weeds and underwater debris
    • Eliminates the need for towing due to fouled stern gear or propeller
    • Eliminates dangerous dives to clear your prop
    • Eliminates possible shaft and strut damage
    • Split design eliminates the need to remove propeller for installation
    • Does not require drilling of the shaft which can threaten shaft integrity

    Model Selection:

    The correct model for your boat will depend on your shaft diameter and your propeller hub diameter. For example, if the forward end hub diameter is 4.00 inches then you will need SS500 as this cutting area has a diameter of almost 5.00 inches. The SS400 is just less than 4.00 inches so there would be no "cutting area" extending past the hub diameter to cut the line.

    Installation:

    Installation is simple and quick. No drilling or tapping and no need to remove the propeller for installation. Can easily be installed underwater by a diver. The Shaft Shark requires just a small clearance fore and aft between the cutlass bearing and the propeller hub (see dimension "D" in diagram below). This dimension allows for sufficient clearance with the cutlass bearing for shaft movement when maneuvering and for water-flow through the cutlass bearing. Always install the Shaft Shark as close to the propeller as possible.

    Dimensions (See diagram below):

    Shaft Shark Model #
    SS300
    SS400
    SS500
    SS600
    B
    3.20"
    3.98"
    4.75"
    5.875"
    C
    2.25"
    3.00"
    3.625"
    4.45"
    D
    .72"
    .72"
    .82"
    1.25"
    Shaft Shark 300 Line and Weed Cutter
    399.99
     
    Status:    null In Stock

     
    Shipping is delayed due to the high number of orders during the warehouse sale.

     

    The Shaft Shark is a serrated edge disc, machined from high quality type 316 stainless steel. The internal diameter is machined to fit the shaft diameter of your boat - either metric or standard. Attached to your propeller shaft, it rotates with the shaft, cutting anything that might try to become entangled around your shaft and prop. Shark Shaft cuts through lines, nets and other underwater debris as soon as it catches.

    Features:

    • Keeps your propeller free from rope, weeds and underwater debris
    • Eliminates the need for towing due to fouled stern gear or propeller
    • Eliminates dangerous dives to clear your prop
    • Eliminates possible shaft and strut damage
    • Split design eliminates the need to remove propeller for installation
    • Does not require drilling of the shaft which can threaten shaft integrity

    Model Selection:

    The correct model for your boat will depend on your shaft diameter and your propeller hub diameter. For example, if the forward end hub diameter is 4.00 inches then you will need SS500 as this cutting area has a diameter of almost 5.00 inches. The SS400 is just less than 4.00 inches so there would be no "cutting area" extending past the hub diameter to cut the line.

    Installation:

    Installation is simple and quick. No drilling or tapping and no need to remove the propeller for installation. Can easily be installed underwater by a diver. The Shaft Shark requires just a small clearance fore and aft between the cutlass bearing and the propeller hub (see dimension "D" in diagram below). This dimension allows for sufficient clearance with the cutlass bearing for shaft movement when maneuvering and for water-flow through the cutlass bearing. Always install the Shaft Shark as close to the propeller as possible.

    Dimensions (See diagram below):

    Shaft Shark Model #
    SS300
    SS400
    SS500
    SS600
    B
    3.20"
    3.98"
    4.75"
    5.875"
    C
    2.25"
    3.00"
    3.625"
    4.45"
    D
    .72"
    .72"
    .82"
    1.25"

    additional image

     
     

     
     

    Have A Suggestion?

     
           
    Defender Email Specials
    Click Here For Our Privacy Policy
    null