Raritan 53101 Series Macerator Pump with Waste Valve Assembly
The realization that a macerator pump needs servicing leaves many boat owners sighing with despair. It's a seriously nasty job. Even if a technician does the dirty work, it'll take days to get rid of the odor. With Raritan Engineering's patented 53101 Macerator Pump with Waste Valve, it's fast and easy to disconnect the pump from the holding tank discharge tube, with minimal, if any, spillage. Raritan's Macerator Pump has few rivals. Available in 12 or 24V DC, it's built for a long, reliable service life. Fully encased in epoxy, its motor has a spring-loaded shaft seal and its unique nitrile rubber impeller is tested and proven to run dry three times longer than the competition. Heavy duty, dual-cut steel chopper blades ensure complete waste maceration. Eliminating the need for an external ball valve, Raritan's Waste Valve isolates the impeller from the holding tank discharge port. It has a 1-1/2" barbed inlet and 3/4" MNPT threaded outlet. A video is at bit.ly/RaritanMacerator. With the optional Smart Macerator Control (SMC), the 53101 Macerator Pump with Waste Valve is almost maintenance-free. It continually monitors the pump motor to protect against priming failure and dry running. With power to the SMC, it will move the impeller periodically to avoid binding. This is especially helpful to boats that aren't used with regularity.
Features:
- The Raritan 53101 Series Macerator Pump includes Innovative Waste / Gate Valve Assembly isolates the waste matter from the pump during maintenance
- This new features allows you to remove the pump without disconnecting plumbing
- All stainless steel bolts to avoid corrosion problems
- Spring loaded Viton shaft seal is used to prevent premature leaks
- Proprietary rubber impeller compound allows longer dry running time
Specifications:
- Self priming flexible rubber impeller with stainless steel wearplate
- Impeller: Raritan Proprietary Nitrile compound
- Blade: Stainless steel double cut
- Seal: Viton Lip with 316 stainless steel spring and case
- Motor:
- Permanent magnet type
- Fully enclosed
- Stainless steel shaft
- Thermal protection for overload
- Powder coated housing with sealed ball bearing
- Power: 12 or 24 Volts DC
- Maximum Draw:
- 12.3 Amps @ 12 Volts
- 6.2 Amps @ 24 Volts
- Ports:
- Inlet: 1-1/2" hose barb & 1-1/2" NPT Male
- Outlet: 3/4" MNPT and 1" Hose Barb
- Fittings snap into the pump via quick connect fitting
- Lead wires: 14 GA, Red and black
- Approvals: Ignition protected, ISO 8846
Item #: 503656MCL-12
Item #: 503621
Item #: 503288
Item #: 503529
Item #: 751685