Item #874718

MAS Epoxies Woodzilla Fiber Epoxy Adhesive/Filler - 35-130

00 Review
$22.99
Want an email once available?
Buy with

Image of : MAS Epoxies Woodzilla Fiber Epoxy Adhesive/Filler - 35-130 MAS Epoxies Woodzilla Fiber Epoxy Adhesive/Filler - 35-130 Item # 874718

Description

Features:

  • The Perfect All Around Adhesive
  • Hundreds of Applications
  • Easy-to-Use
  • Wood Colored Epoxy Cartridge
  • Fast Curing, translucent paste epoxy with unlimited bonding, sealing and filling applications
  • For use by professionals, homeowners and DIY Hobbyists
  • Formulated with a viscosity like Vaseline to be extremely versatile, flexible and resilient with enormous strength
  • Easy to work with and won't drip or sag when used overhead or on vertical surfaces
  • Demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water
  • After cure, Woodzilla can be painted, drilled, machined, sanded, filed, tapped or sawn
  • Suggested Uses:
    • As an Adhesive: Wood (All types), Doors, Chip board, Window Sills, Decks, Furniture, Chairs
    • As a Sealant: Boat Hulls, Door Frames, Decks, Window Sills
    • As a Filler: Holes, Castings, Patterns, Molds, Voids, and much more
  • Application Tips:
    • Apply Woodzilla in your desired thickness to both prepared surfaces to be bonded and bring them together firmly
    • Use screen wire or fiberglass cloth to reinforce large voids or gaps
    • To smooth out work, use lacquer thinner or denatured alcohol
    • Woodzilla mixes better at 80°F than 40°F
    • In cold or cool temperatures, place container near a heat source, but use caution to heat up slowly and consistently
    • Preparation and Mixing Tips:
      • Prepare a clean, flat working surface for mixing and working with the Epoxy
      • Clean and prepare the surfaces to be bonded. (Bio-Solv is great for surface prep and leaves no film
      • Insert the Epoxy cartridges into any caulking gun when ready to use
      • Open the Epoxy by removing the collar and nozzle plug
      • To use the static injector (2 Included) remove the collar and nozzle plug
      • Insert the nozzle into the collar and attach to cartridge
      • When not using the Static Injector, use a small putty knife or flexible artist spatula to mix, apply and sculpt
      • Please note that Woodzilla will not bond to wax paper, Teflon, Polyethylene and some other plastics
      • There are thousands of plastic combinations, so when in doubt, test a small area

After further product review, MAS found that due to the high viscosity Woodzilla did not perform well under 80 degrees F. Heat tube in hot water bath or by other means until material reaches 80 degrees F. At this point the product will dispense properly.

Safety Data Sheet

Part Numbers for MAS Epoxies Woodzilla Fiber Epoxy Adhesive/Filler - 35-130

Related Categories

Related Categories

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 42.41ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Questions

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 32.34ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;