Keyword Or Item #
Jabsco 18590 Sealed Macerator Pump with Run-Dry Protection
Item #:
502929
Brand:
Jabsco
Model #:
Multiple Models Available
Shipping Weight:
5.30
Lbs.
Our Price:
From: $129.99 To: $149.99
Please enter quantity below.
Jabsco Sealed Macerator Pumps provide the ideal solution for waste, fish box and livewell tank evacuation.
Features:
- The Jabsco 18590 Series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area
- Self priming to 5 feet this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes
- Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation
- It is recommended that holding tanks be flushed with several gallons of water after each pump out
- This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage
- The Jabsco Macerator Pump is the ideal pump for the emptying of fish box and livewell receptacles
- Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank
- If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties
- Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline
- Again the Jabsco Macerator pump has the characteristics that lend themselves to this application
- The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed by the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats
Specifications:
- Flow Rate: 12 GPM
- Port Size: 1-1/2" inlet ( NPT and Hose Barb options) with 1" Hose Barb Outlet
- Stainless steel 4-blade cutter reduces particle size to 1/8" max
- New Nitrile compound flexible impeller
- Lip-type seal
- Self-priming pump with stainless steel wear plate
- Fully enclosed, permanent magnet-type motor
- Can run dry without damage
- Meets ISO 8846 MARINE ignition protection standards
- Dimensions: 11-9/16" L x 3-1/4" H x 4-11/16" W
WARNING: This product MAY expose you to chemicals, which are known to the State of California to cause cancer, birth defects and/or other reproductive harm. For more information go to www.p65warnings.ca.gov
Jabsco Single-Diaphragm Filterless Waste Pump
Item #: 502928Flow Rate: 5 GPM, Port Size: 1-1/2"
Select Voltage, Draw: 8 Amps @ 12 Volts / 2.5 Amps @ 24 Volts
Self-Priming, Single Diaphragm Pump with Dry-Running Capability
Item #: 502928
$259.99
Model #:
Multiple Voltage Choices Available
Jabsco Diverter Y-Valve
Item #: 500433Diverts Waste into Onboard Holding Tank
Includes (2) 1-1/2" Fitted Discharge Ports, (1) 1-1/2" Straight
Material: Polypropylene and Stainless Steel
Item #: 500433
$69.99
Model #:
45490-1000
Raritan Tru-Design Manual Aquavalve Vented Loop
Item #: 503621Color: White, Select Size
Molded from Glass-Reinforced Nylon Composite with Silicon Bleed Valve
Application: Inlet and Discharge Pipes Below Waterline
Item #: 503621
From: $17.99
To: $24.99
Raritan Sani / Flex Sanitation Hose
Item #: 503529Select Diameter, Color: White with Blue Stripe
Material: Butyl Rubber Reinforced with Double Steel Helix
Sold by the Foot, Lowest Odor Permeation Level
Item #: 503529
From: $9.89
To: $9.99
Raritan Tru-Design Complete Thru-Hull and Seacock Assembly
Item #: 503628Includes Thru-Hull, Load Bearing Collar, Ball Valve & Straight Hose Barb
Material: Glass Reinforced Nylon Composite, ABYC H-27 Compliant
Compact Footprint, No Corrosion or Electrolysis, Select Hose Barb
Item #: 503628
From: $99.99
To: $199.99
Model #:
Multiple Sizes Available
West System Disposable Gloves
Item #: 751685Size: Large - One Size fits Most, Material: Nitrile
Function: More Chemically and Puncture Resistant than Latex Gloves
Sold 4 Pairs per Package
Item #: 751685
Model #:
832-4
Jabsco Macerator Pump Service Kit
Item #: 500346Fits ITT Jabsco 18590 And 18690 Series Macerator Pumps
Applications: Jabsco 18590 and 18690 Series Macerator Pumps
Service Kit Includes Body, Gaskets, Impeller and Wearplate
Item #: 500346
$58.99
Model #:
18598-1000
Jabsco Macerator Pump Replacement Studs Kit
Item #: 506459Applications: 18590-2092 and 18590-2094 Macerator Pumps
Includes (2) 17288-0010 (3") Stainless Steel Studs
Includes (2) 17288-0000 (3-5/8") Stainless Steel Studs
Item #: 506459
$15.99
Model #:
17288-1000