Cart   null      null
Track Orders
Customer Service
My Account
Logo linked to Defender Homepage
Important message
Call or email to speak with our in-house knowledgeable staff.
Phone: 800-628-8225 | Int'l.: 860-701-3400 | Email: Contact Us
promo A
promo B
promo C
promo D
null
null
null
null
null
Marvair CR330 Condensation Removal Kit
null
null
null
 

Marvair CR330 Condensation Removal Kit

  • Removes Condensation and Discharges Overboard
  • Condensate Pumped Overboard when the Air Conditioner's Circulation Pump Runs
  • A Separate Condensate Pump is Not Required
  • Item #: 
    901639
    Brand: 
    Dometic
    Model #: 

    225600036

    Packaged Weight: 
    3.00 Lbs.
    List Price: 
    $350.00
    Our Price:
    $149.99
    901639 Dometic Marvair CR330 Condensation Removal Kit 225600036

    Features:

    • The Marvair CR330 removes the condensate water produced during the cooling cycle of your Marvair reverse-cycle air conditioner and discharges the condensate into the air conditioner's outlet water line
    • The condensate is pumped overboard any time the air conditioner's circulation pump is working and sufficient condensate is in the condensate pan of your Marvair unit
    • By operating on the Venturi effect, a separate condensate pump is not required
    • A water filter/strainer, a reducer and a check valve are also provided and must be installed with the CR330
    • The filter prevents debris from entering the CR330 and obstructing the water flow
    • The check valve allows the condensate to flow in only one direction
    • The flow rate, measured at the air conditioner, must be at least 1.0 GPM (3.8 LPM) but no more than 4.6 GPM (17.4 LPM)
      • Flow rates less than 1.0 GPM (3.8 LPM) may result in improper removal of the condensate
      • Flow rates greater than 4.6 GPM (17.4 LPM) may result in a restriction of water flow to the air conditioner
      • Always refer to the air conditioner's Owner's manual or Product Data Sheet to determine the correct water flow for proper operation of the Marvair air conditioner
    • Installation:
      • The CR330 is installed into the outlet water line of the Marvair air conditioner
      • The discharge water flows through the CR330 to the overboard thru hull fitting
      • Condensate from the drain pan flows into the CR330 and is pulled overboard by the discharge water from the air conditioner
      • Included in the installation materials are 1/4” clear tubing and 5/8” clear tubing
      • Various lengths of this tubing must be cut to connect the components
      • To optimize the performance of the system, be sure to follow the recommendations for the lengths of tubing
      • Locate the outlet (discharge) water line on your Marvair air conditioner
        • Follow the water line, looking for a suitable place to install the CR330

    Diagram Parts List: (See Image Below)

    Number on Drawing
    Quantity
    Description
    12
    1
    CR330 condensate remover
    5
    1
    Strainer/filter with ½” FPT connections
    10
    1
    1/4” x 1/4” Check valve
    4
    1
    5/8” Barb x 1/2” FPT coupling
    3
    3
    Stainless Steel screw type hose clamp for 5/8” tubing
    7
    4
    Stainless Steel screw type hose clamp for 1/4” tubing
    8
    1
    2-1/2" x 1/4” ID clear tubing.
    11
    1
    7 ft x 1/4” ID clear tubing.
    1
    1
    1 ft x 5/8” ID clear tubing
    6
    1
    1/4” barb x 1/2” MPT adapter
    2
    1
    Hold down clamp for 5/8” tubing
    9
    2
    Hold down strap for 1/4” tubing
    13
    2
    Hold down strap for the CR330
    14
    1
    5/8” barb x 1/2” MPT fitting

    Click Here for an Installation Guide for this Product

    Marvair CR330 Condensation Removal Kit
    149.99
     
    Status:  null In Stock

     
    Shipping is delayed due to the high volume


    Features:

    • The Marvair CR330 removes the condensate water produced during the cooling cycle of your Marvair reverse-cycle air conditioner and discharges the condensate into the air conditioner's outlet water line
    • The condensate is pumped overboard any time the air conditioner's circulation pump is working and sufficient condensate is in the condensate pan of your Marvair unit
    • By operating on the Venturi effect, a separate condensate pump is not required
    • A water filter/strainer, a reducer and a check valve are also provided and must be installed with the CR330
    • The filter prevents debris from entering the CR330 and obstructing the water flow
    • The check valve allows the condensate to flow in only one direction
    • The flow rate, measured at the air conditioner, must be at least 1.0 GPM (3.8 LPM) but no more than 4.6 GPM (17.4 LPM)
      • Flow rates less than 1.0 GPM (3.8 LPM) may result in improper removal of the condensate
      • Flow rates greater than 4.6 GPM (17.4 LPM) may result in a restriction of water flow to the air conditioner
      • Always refer to the air conditioner's Owner's manual or Product Data Sheet to determine the correct water flow for proper operation of the Marvair air conditioner
    • Installation:
      • The CR330 is installed into the outlet water line of the Marvair air conditioner
      • The discharge water flows through the CR330 to the overboard thru hull fitting
      • Condensate from the drain pan flows into the CR330 and is pulled overboard by the discharge water from the air conditioner
      • Included in the installation materials are 1/4” clear tubing and 5/8” clear tubing
      • Various lengths of this tubing must be cut to connect the components
      • To optimize the performance of the system, be sure to follow the recommendations for the lengths of tubing
      • Locate the outlet (discharge) water line on your Marvair air conditioner
        • Follow the water line, looking for a suitable place to install the CR330

    Diagram Parts List: (See Image Below)

    Number on Drawing
    Quantity
    Description
    12
    1
    CR330 condensate remover
    5
    1
    Strainer/filter with ½” FPT connections
    10
    1
    1/4” x 1/4” Check valve
    4
    1
    5/8” Barb x 1/2” FPT coupling
    3
    3
    Stainless Steel screw type hose clamp for 5/8” tubing
    7
    4
    Stainless Steel screw type hose clamp for 1/4” tubing
    8
    1
    2-1/2" x 1/4” ID clear tubing.
    11
    1
    7 ft x 1/4” ID clear tubing.
    1
    1
    1 ft x 5/8” ID clear tubing
    6
    1
    1/4” barb x 1/2” MPT adapter
    2
    1
    Hold down clamp for 5/8” tubing
    9
    2
    Hold down strap for 1/4” tubing
    13
    2
    Hold down strap for the CR330
    14
    1
    5/8” barb x 1/2” MPT fitting

    Click Here for an Installation Guide for this Product







    Documentation available at the following links:

    View Dometic's Air Conditioner Spec sheet

     
     

    Have A Suggestion?

     
           
    Defender Email Specials
    Click Here For Our Privacy Policy
    null