View Cart   null      null
Track Orders
My Account
Logo linked to Defender Homepage
Most Orders Placed Mon - Fri by 4:30 PM ET Ship Same Day!
Call or email to speak with our in-house knowledgeable staff.
Phone: 800-628-8225 | Int'l.: 860-701-3400 | Email: Contact Us
.
promo A
promo B
promo C
promo D
 
null
null
Morse Marine FLATFISH Brass Sleeved Shaft Bearings
 

Morse Marine FLATFISH Brass Sleeved Shaft Bearings

  • Dimensions: 1-1/2" ID 2" OD 6" L
  • Material: Pollution-Free Naval Brass. Rubber Lined and Water Lubricated
  • Requires No Seals and No Oil or Grease for Lubrication
  • Item #: 
    305927
    Brand: 
    Morse Rubber
    Model #: 

    FLATFISH

    Packaged Weight: 
    1.63 Lbs.
    List Price: 
    $94.71
    Our Price:
    $74.99
    305927 Morse Rubber Morse Marine FLATFISH Brass Sleeved Shaft Bearings FLATFISH

    Features:

    • Morse Marine Bearings are rubber lined and water lubricated
      • The use of water as a lubricant provides efficient low friction operation and a stable lubricant film due to the water's incompressibility
    • Outer Material: Pollution-Free Naval Brass Marine Bearings
      • The rigid outer shell is made of naval brass
      • The standard flanged series outer shell is made of centrifugal cast naval brass
      • Rubber-lined naval brass sleeve bearings adapt equally well to strut and stern-tube mounts
      • External brass shells are machined and polished to provide easy fitting
    • They require no seals and no oil or grease for lubrication
    • Lubrication is provided by the water in which the vessel is traveling, making these bearings environmentally friendly
    • Liner Material: The high durability rubber liner is resistant to abrasion caused by particles in the water
      • The rubber is also oil and chemical resistant
      • Specially formulated oil- and chemical-resistant nitrile rubber is securely bonded to the shell
      • The resilience of the rubber liner allows these bearings to dampen noise and vibration
    • Morse Marine Bearings are precision molded and machined for consistently accurate dimensions and concentricity
    • Locked in place with cone-pointed set screws
    • Sleeve bearings are usually installed by light press fitting

    Bearing Selection:

    • Normal design practice is to select a bearing with a length equal to 4 times the shaft diameter
    • It may be acceptable to deviate from this rule when application load requirements permit the use of shorter bearing lengths

    Bearing. Bearing area is:

    • Bearing I.D. (Shaft diameter) multiply x Bearing length

    Loading capability is determined by:

    • Multiplying that Bearing area x 35 PSI
    • Example: (RAY) - 3" Shaft diameter x 12" Length 36 square inch Bearing area x 35 PSI = 1,260 lbs (Bearing load capacity)
    Morse Marine FLATFISH Brass Sleeved Shaft Bearings
    74.99
     
    Status:    null In Stock

     



    Features:

    • Morse Marine Bearings are rubber lined and water lubricated
      • The use of water as a lubricant provides efficient low friction operation and a stable lubricant film due to the water's incompressibility
    • Outer Material: Pollution-Free Naval Brass Marine Bearings
      • The rigid outer shell is made of naval brass
      • The standard flanged series outer shell is made of centrifugal cast naval brass
      • Rubber-lined naval brass sleeve bearings adapt equally well to strut and stern-tube mounts
      • External brass shells are machined and polished to provide easy fitting
    • They require no seals and no oil or grease for lubrication
    • Lubrication is provided by the water in which the vessel is traveling, making these bearings environmentally friendly
    • Liner Material: The high durability rubber liner is resistant to abrasion caused by particles in the water
      • The rubber is also oil and chemical resistant
      • Specially formulated oil- and chemical-resistant nitrile rubber is securely bonded to the shell
      • The resilience of the rubber liner allows these bearings to dampen noise and vibration
    • Morse Marine Bearings are precision molded and machined for consistently accurate dimensions and concentricity
    • Locked in place with cone-pointed set screws
    • Sleeve bearings are usually installed by light press fitting

    Bearing Selection:

    • Normal design practice is to select a bearing with a length equal to 4 times the shaft diameter
    • It may be acceptable to deviate from this rule when application load requirements permit the use of shorter bearing lengths

    Bearing. Bearing area is:

    • Bearing I.D. (Shaft diameter) multiply x Bearing length

    Loading capability is determined by:

    • Multiplying that Bearing area x 35 PSI
    • Example: (RAY) - 3" Shaft diameter x 12" Length 36 square inch Bearing area x 35 PSI = 1,260 lbs (Bearing load capacity)






    Documentation available at the following links:

    Morse Marine BLACKFISH Brass Sleeved Shaft Bearings
    Item #: 305914
  • Dimensions: 1" ID 1-1/4" OD 4" L
  • Material: Pollution-Free Naval Brass. Rubber Lined and Water Lubricated
  • Requires No Seals and No Oil or Grease for Lubrication
  •  
    null
    List Price: $58.55
    Our Price: $38.99
    Model #:
    BLACKFISH
     
     
     

    Have A Suggestion?

     
           
    Defender Email Specials
    Click Here For Our Privacy Policy
     
    null