Lonseal #400 Contact Adhesive

This Contact type adhesive is designed for applications where a strong, fast setting contact adhesive is needed, such as stair risers and tacking areas on vertical surfaces.

Application :

• Apply per label instructions.
• Uniformly coat both surfaces after they are thoroughly cleaned and free of oil, dirt or grease
• Allow adhesive to become tacky to the touch, then join substrates and allow drying
• Depending on surface porosity and method of application
• Approx. spread rate: 150 -200 square feet of coverage per gallon
• Open time: 3 - 15 minutes
• Working time: 0 minutes**

OPEN TIME: Waiting time required before placing the flooring material into the adhesive.

WORKING TIME: Amount of time for the adhesive to accept the flooring material after being applied to the substrate.

**Due to the high initial tack of the #400, once the material is placed into the adhesive after allowing for adequate open time, it will not be able to be repositioned.