Airmar B175C-12-H Bronze Low Profile Thru Hull CHIRP Single-Band Transducer

The high-frequency band delivers a narrow beamwidth - excellent for pinpointing fish holding tight to wrecks, reefs, and other structures. The B175H has up to 80 kHz of total bandwidth in just one installation for superior shallow-water performance and bottom detail.

Features:

• Depth and fast-response water-temperature sensor
• 1 kW with a maximum depth of 304 m (1,000')
• 80 kHz of total bandwidth from one transducer
• High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation
• Bronze housing for use on stepped, planing or displacement hull
• Low-profile, thru-hull housing yields good resolution at speed when installed properly
• Applications: Universal
  • Includes a 10 meter Cable (33 feet)
  • These units have bare wire connectors
• Hull Type: Fiberglass or wood hulls
  • Never install a bronze housing in an aluminum hull, because electrolytic corrosion will occur
• Match Tilt Angle of Transducer to Deadrise
  • Be sure your transducer model matches the deadrise angle of your hull at the selected mounting location
  • The tilt angle is printed on the top of the transducer
  • To measure the deadrise angle of your hull at the selected mounting location, use an angle finder or a digital level (See Attached Manual)
    • 0° transducer for deadrise angles from 0° to 7°
    • 12° transducer for deadrise angles from 8° to 15°
    • 20° transducer for deadrise angles from 16° to 24°

Click Here for an Owner's Manual and Installation Guide for this Product

Click Here for a Brochure for this Product

Click Here for a Transducer Comparison Chart