IMAGE FOR ILLUSTRATION ONLY, FEATURES MAY VARY.
Webasto FCFK Air Conditioning Unit w/ Reverse-Cycle Heat Kit -12K BTU/230V
Item #:
901802A12230
Brand:
Webasto
Model #:
5012243A
Packaged Weight:
142.10
Lbs.
List Price:
$3,995.00
Our Price:
$3,254.99
Status: 
Ships Direct
Note: This item ships directly from the manufacturer.
This item typically has a 2-3 week lead time before shipping.
Ships Direct
Note: This item ships directly from the manufacturer.
This item typically has a 2-3 week lead time before shipping.
Shipping Note:
THIS PRODUCT CANNOT SHIP STANDARD GROUND.
It ships ONLY by Truck Freight.
Please call us at 800-628-8225 or E-mail for a valid shipping quote, since Truck Freight rates change regularly.
This item ships directly from the manufacturer.
The Webasto FCFK Air Conditioning with Reverse-Cycle Heat - Complete System Kit is exclusively designed for marine applications. The Webasto FCF Series Air Conditioner s are quiet, compact, economical, and efficient. The System Kit includes the components required for a complete FCF installation including: Air conditioning unit and controls, return and supply air duct kit, and seawater intake and discharge kit.
FCF 12000 Air Conditioner Includes:
- 12000 BTU, FCF air conditioning unit with reverse-cycle heat
- Digital control panel with bezel and cable
- Wireless remote control
- Ducting collar
FCF 12000 Air Conditioner Features:
- FCF air conditioning unit with reverse cycle heat
- Unit is mounted on a sturdy one-piece, corrosion-free, stainless steel chassis with extra-deep condensation tray
- Ultra-quiet compressors minimize unwanted vibration and noise
- Critical components have long-lasting, baked-on enamel finish
- Multi-inlet port evaporators are anodized for superior corrosion protection
- Uses environmentally friendly R-410A refrigerant
- High-velocity, 3-speed, 360° rotatable blower
- Replaceable air filter
- Easy first-time installation or retrofit as replacement for existing unit
- 2-year factory warranty
Air Duct Kit Includes:
- (1) Air Return Grill
- (2) Air Supply Grills
- (2) Transition Boxes
- (1) "Y" Splitter Air Flow Divider
- (1) Flexible Insulated Duct
Air Duct Kit Features:
- Components needed to install 2 outflow (supply air) vents in 1 cabin or split between 2, depending on the size and layout of the spaces
- Supply and return air vents are properly sized for the capacity of the air conditioner
- Insulated ducts:
- Reduce the amount of air temperature change between the compressor and the air vents
- Reduce the amount of condensation that will form on the ducts during hot / humid conditions
- Supply air grilles have moveable louvers so the air flow can be directed to where you want it
- Return air grill has fixed louvers
- "Y" Splitter Air Flow Divider has an adjustable internal baffle that controls how much air is directed into each of the two ducts
- Transition boxes use side entry ports for the shallowest installation of the supply air vents
Seawater Intake and Discharge Kit Includes:
- (1) Koolair PM1000 Seawater Pump
- (1) Bronze Sea Water Scoop
- (1) Bronze Seacock
- (1) Bronze 90 deg. Elbow
- (1) Strainer Sea Water Bronze
- (2) Bronze Fittings
- (1) Bronze Tail Piece
- (1) Bronze Tail Piece
- (1) Plastic Mushroom Thru Hull Fitting
- (5) ft 3/4" Extra Heavy Water Hose
- (25) ft 5/8" I.D. Trident Extra Heavy Water Hose
- (18) Hose Clamps for Sea Water System
Seawater Intake and Discharge Kit Features:
- Components necessary to install the sea water intake/discharge system for the air conditioning unit from the sea water scoop to the overboard discharge thru hull fitting
- Koolair PM1000 Seawater Pump
- Magnetically driven with no shaft seal
- Hardened carbon bushings allow for extended run dry time without any damage to the pump head
- Thermal overload protection
- Motor is Open Drip Proof (ODP) which allows it to be hosed down without damage
- Air cooled motor
- All plumbing fittings are bronze except the discharge fitting which will be located above the water line
- Hose clamps are stainless steel
Specifications:
- Air Conditioner (FCF0012000GS/ FCF0012023G)
- Cooling / Heat Capacity: 12,000 BTU / hour
- Frequency: 60 Hz
- Average Load Amps: 4.5 @ 230 Volts AC
- Suggested Supply Air: 20 sq. in.
- Suggested Return Air: 100 sq. in.
- Blower Output: 410 cfm
- Ducting Collar Diameter: 5"
- Dimensions: 15" L x 17.2" H x 13" D
- Return and Supply Air Duct Kit
- (1) Air Return Grill (WBCL0040080)
- Fixed Blades
- Size: 14" x 10"
- Material: Plastic
- (1) Air Return Grill (WBCL0040080)
- (2) Air Supply Grills (WBCL500140)
- Size: 8" x 4"
- Material: Plastic
- (2) Transition Boxes (5010235A)
- 8" x 4"
- Side Entry
- Duct Hose Connection: 5" Flat Oval
- (1) "Y" Splitter Fitting Air Flow Divider (WBCL001563)
- (1) 5" Inlet
- (2) 5" x 5" Outlets
- (1) Flexible Insulated Duct (WBCL001808)
- Size: 5" x 25' Long
- Seawater Intake and Discharge Kit
- (1) Koolair PM1000 Seawater Pump 3/4" MNPT
- Max Flow: 17.2 GPM / 54.8 LPM
- Max Head: 27 FT / 6 M
- Power: 1/8 HP / .093 KW
- Electrical: 115V 50/60 HZ
- Not Submersible
- (1) Bronze Sea Water Scoop 3/4" MNPS (Groco STH-750-L)
- (1) Bronze Seacock 3/4" FNPS to 3/4" FNPT (Groco FBV-750)
- (1) Bronze 90 deg. Elbow 3/4" MNPT to 3/4" Hose Barb (Groco PTHC-750)
- (1) Strainer Sea Water Bronze 3/4" NPTF (Groco ARG-755-P)
- (2) Bronze Fitting 3/4" MNPT to 3/4" Hose Barb (Groco PTH-750)
- (1) Bronze Tail Piece 3/4" FNPT to 3/4" Hose Barb (Groco TPT-750)
- (1) Bronze Tail Piece 3/4" FNPT to 5/8" Hose Barb (Groco TPT-625)
- (1) Thru Hull Plastic Overboard 5/8" Hose Barb
- (5) ft 3/4" Extra Heavy Water Hose, Black EPDM Rubber, 4 Spiral
- (25) ft 5/8" I.D. Trident Extra Heavy Water Hose, Black EPDM Rubber, 4 Spiral
- (18) 3/4" Hose Clamp for Sea Water System
Package Includes:
- FCF Air Conditioner Kit Includes:
- (1) 12000 BTU FCF Air conditioning unit with reverse cycle heat
- (1) Wireless Remote
- (1) Digital Display/Controller with bezel
- (1) Cable
- Air Duct Kit Includes:
- (1) Air Return Grill
- (2) Air Supply Grill
- (2) Transition Boxes
- (1) "Y" Splitter Fitting Air Flow Divider
- (1) Flexible Insulated Duct
- Sea Water Intake Kit Includes:
- (1) Koolair PM1000 Seawater Pump
- (1) Bronze Sea Water Scoop
- (1) Bronze Seacock
- (1) Bronze 90 deg. Elbow
- (1) Strainer Sea Water Bronze
- (2) Bronze Fittings
- (1) Bronze Tail Piece
- (1) Bronze Tail Piece
- (1) Thru Hull Plastic Overboard
- (5) ft 3/4" Extra Heavy Water Hose
- (25) ft 5/8" I.D. Trident Extra Heavy Water Hose
- (18) Hose Clamps for Sea Water System
Imperial dimensions are approximate. The manufacturer built this product to metric specs.
Documentation available at the following links: