Defender Home Page
Call or email to speak with our In-House Technical Staff/Advisors
Phone: 800-628-8225 Int'l.: 860-701-3400 Email: Contact Us
Follow us on Facebook
Shipping Info
Defender Home Page
Your Cart
null
null
null View Cart View Shopping Cart
null Check My Order(s)
null Track My Package(s)
Metric/Inch
Conversion Chart
Categories
Shopping Areas
Information
Boats & Motors
null Defender Seal null
promo A
promo B
promo C
promo D
 
Pettit H2 Prime Epoxy Primer and Adhesion Promoter Kit
ONLY  5 LEFT!
Buy Now While this Item is Still Available!
 

Pettit H2 Prime Epoxy Primer and Adhesion Promoter Kit

  • Applications: Hydrocoat, Hydrocoat SR, Hydrocoat Eco, and Neptune 6
  • Function: Hard, Durable Coating Protecting from Scuffing and Scratching
  • Provides Lower VOC, Cleans Up with Soap and Water, Size: Gallon
  • Item #: 
    756721EPOGAL
    Brand: 
    Pettit
    Model #: 

    47404741

    Packaged Weight: 
    12.80 Lbs.
    Our Price:
    $99.99
    756721EPOGAL Pettit Pettit H2 Prime Epoxy Primer and Adhesion Promoter Kit 47404741

    Features:

    • Pettit H2 Prime 4740/4741 is a low VOC, two-part water-based epoxy primer and adhesion promoter
    • Applications: Hydrocoat, Hydrocoat SR, Hydrocoat Eco, and Neptune 5
    • Part of Pettit 's no -sand fiberglass system
      • Non-sanding system is VOC compliant in all areas when used with Bio-Blue Surface Prep 92
    • Provides excellent adhesion to polyester and vinyl ester gelcoats, as well as epoxies
    • H2 -Prime dries to a hard, durable coating that provides additional protection against scuffing and scratching
    • Flexible recoat windows takes the guesswork out of overcoating
      • Extended over-coating times mean easier scheduling and a lower chance of paint failure due to missed windows
    • Provides lower VOC, low odor, and cleans up with soap and water
    • This system does not void hull warranties against osmotic blistering

    Specifications:

    • Vehicle: Waterborne epoxy/polyamide
    • Finish: Flat
    • Color: Light Gray
    • Components: 2
    • Mix Ratio: (A/B): 4 to 1 (by volume)
    • Curing Mechanism: Chemical Cure
    • Pot life: Use within 3 hours
    • Induction: Let mixed primer stand 15 minutes before use
    • Solids (theoretical): 52% by weight
    • Coverage: 350 ft 2 /gal.
    • VOC: <200 g/l (mixed)
    • Application Method: Brush, Roller, or Spray
    • Number of Coats: 1 minimum, up to 3 coats recommended for best results
    • Dry Film Thickness per Coat: 1.5 - 2.5 mils (4.5 - 6.5 mils wet)
    • Application Temperatures: 55° F (13° C) - 95° F (35° C)
    • Dry Time @ 70° F (21° C): To recoat: 2 - 3 hours minimum / after 72 hours sanding is required To overcoat: Overnight minimum required
    • Thinner: Pettit 140 Water -Based Brushing Thinner
    • Cleanup: Soap and Water
    Pettit H2 Prime Epoxy Primer and Adhesion Promoter Kit
    99.99
    Status:  null In Stock

     

    shipping delay

     

    Warning This product ships ground only


    Features:

    • Pettit H2 Prime 4740/4741 is a low VOC, two-part water-based epoxy primer and adhesion promoter
    • Applications: Hydrocoat, Hydrocoat SR, Hydrocoat Eco, and Neptune 5
    • Part of Pettit 's no -sand fiberglass system
      • Non-sanding system is VOC compliant in all areas when used with Bio-Blue Surface Prep 92
    • Provides excellent adhesion to polyester and vinyl ester gelcoats, as well as epoxies
    • H2 -Prime dries to a hard, durable coating that provides additional protection against scuffing and scratching
    • Flexible recoat windows takes the guesswork out of overcoating
      • Extended over-coating times mean easier scheduling and a lower chance of paint failure due to missed windows
    • Provides lower VOC, low odor, and cleans up with soap and water
    • This system does not void hull warranties against osmotic blistering

    Specifications:

    • Vehicle: Waterborne epoxy/polyamide
    • Finish: Flat
    • Color: Light Gray
    • Components: 2
    • Mix Ratio: (A/B): 4 to 1 (by volume)
    • Curing Mechanism: Chemical Cure
    • Pot life: Use within 3 hours
    • Induction: Let mixed primer stand 15 minutes before use
    • Solids (theoretical): 52% by weight
    • Coverage: 350 ft 2 /gal.
    • VOC: <200 g/l (mixed)
    • Application Method: Brush, Roller, or Spray
    • Number of Coats: 1 minimum, up to 3 coats recommended for best results
    • Dry Film Thickness per Coat: 1.5 - 2.5 mils (4.5 - 6.5 mils wet)
    • Application Temperatures: 55° F (13° C) - 95° F (35° C)
    • Dry Time @ 70° F (21° C): To recoat: 2 - 3 hours minimum / after 72 hours sanding is required To overcoat: Overnight minimum required
    • Thinner: Pettit 140 Water -Based Brushing Thinner
    • Cleanup: Soap and Water

     
     

    Pettit EZ Prime - High-Build Topside Undercoater - Gallon
    Item #: 750240
  • Base Coat for Aged, Checked, Pitted Surfaces Above the Waterline
  • Formulated for Fiberglass, Wood and Previously Painted Surfaces
  • Container: Gallon, Color: White
  •  
    null
    Our Price: $77.99
    Model #:
    6149
     
     
     

    Have A Suggestion?


    This form is intended to improve the current product page. For Customer Service, please click here

    Help us make our site better for everyone! Let us know you've found something wrong or frustrating on this page and we will improve it. Please mark each that apply.










    Comments or Examples:
    Examples: Missing information such as dimensions and model number, typos, inaccuracies, etc...

                





           
    Defender Email Specials
    Click Here For Our Privacy Policy
     
    null