Hart Tank Tender 1 to 4 Tank Monitor System w/ Purge Valve Option - 30" - 35"
Item #:
503694305WPV
Brand:
Hart
Model #:
S30-4-PV
Packaged Weight:
5.00
Lbs.
Our Price:
$1,115.99
Status:
Ships Direct


Package Includes:
- (1) 4-Tank Tender (30 / 35" Gauge with 6" x 4" panel) with Purge Valve
- (1) 120 foot Roll of 1/8" OD nylon tubing (30' for each Tank)
- (4) Stainless Steel Tank Penetration Fittings (TPF)
- (4) Specially extruded 30" straight nylon tubes attached to Tank Penetration Fittings
- Mounting hardware
- Installation manual
General Features:
- The Hart Tank Tender uses air pressure to provide accurate level readings (+/-1% at mid-scale on a proper installation) for up to (10) water, diesel and holding tanks
- No electrical connection necessary
- Choosing a Tank Tender:
- As an example, a typical 4-tank installation may measure the levels of (1) Diesel fuel tank, (1) Waste holding tank and (2) Water tanks
- Gauges are calibrated in inches for diesel and water
- Monitoring waste holding tanks is possible with the optional "Purge" toggle switch valve
- The Purge toggle switch valve clears the waste holding tank's Tank Penetration Fitting (TPF) tubes before taking readings
- System conveniently allows you to check all tank levels with one instrument from one onboard location
- Simple, completely self-contained pneumatic operation:
- Select tank to be measured
- Pump small amount of air through tubing to bottom of the selected tank
- When air pressure in the tube equals the liquid pressure at the bottom of the tank, gauge displays pressure in inches of liquid
- Package includes: Tank Tender Gauge with Panel, Nylon Tubing and all fittings required for installation (Some Include Optional Purge Valve)
- Monitoring waste holding tanks is possible with the optional "Purge" toggle switch valve
- System components:
- (1) Instrument panel set up for appropriate number of tanks
- Gauge Selection Select gauge with margin of safety regarding tank depth
- For example, use 30 / 35" gauge if your tank is 20" deep; for a tank that is 40" deep, use 60 / 70" gauge
- Gauge Selection Select gauge with margin of safety regarding tank depth
- (30') of 1/8" OD nylon tubing per tank (Sold as continuous roll)
- (1) Stainless steel Tank Penetration Fitting (TPF) per tank with specially extruded 30" straight nylon tube
- Tank Penetration Fitting Extender
- Each 60 / 70" Tank Tender system also includes (1) 30" TPF Extender per tank
- This component consists of a 30" length of straight nylon tube with a stainless steel stiffening wire inside and a brass barb on one end that fits into the end of the TPF tube
- Additional 30" lengths are available for further extending the TPF for even deeper tanks
- Tank Penetration Fitting Extender
- Mounting hardware
- System is convenient, reliable, inexpensive and easy to install
- Tanks can be located up to 1000 ft. from Tank Tender unit
- System is built with corrosion-resistant materials including brass and stainless steel
Important Note: Please leave a message, during checkout, confirming the depth and contents of your tank(s)
Documentation available at the following links: