Defender Home Page
Call or email to speak with our In-House Technical Staff/Advisors
Phone: 800-628-8225 Int'l.: 860-701-3400 Email: Contact Us
Follow us on Facebook
Shipping Info
Defender Home Page
Your Cart
null
null
null View Cart View Shopping Cart
null Check My Order(s)
null Track My Package(s)
Metric/Inch
Conversion Chart
Categories
Shopping Areas
Information
Boats & Motors
null Defender Seal null
promo A
promo B
promo C
promo D
 
null
null
Hart Tank Tender 1 to 5 Tank Monitor System with Purge Valve Option
Image May Be Similar but Not the Same as Actual Product
 

Hart Tank Tender 1 to 5 Tank Monitor System with Purge Valve Option

  • Gauge Scale / Tank Depth (Max.): 60" Water or Holding (Includes Purge Valve)
  • Applications: Water, Diesel, Waste Tanks (Waste Requires Purge Valve)
  • Power: Pneumatic, Cutout (Panel): 3-1/16" x 5-1/16", Dimensions: 4" x 6"
  • Item #: 
    503695607WPV
    Brand: 
    Hart
    Model #: 

    S60-5 W/PV

    Packaged Weight: 
    5.00 Lbs.
    List Price: 
    $1,045.00
    Our Price:
    $962.99
    503695607WPV Hart Hart Tank Tender 1 to 5 Tank Monitor System with Purge Valve Option S60-5 W/PV

    Package Includes:

    • (1) 5-Tank Tender (60 / 70" Gauge with 6" x 4" panel) with Purge Valve
    • (1) 150 foot Roll of 1/8" OD nylon tubing (30' for each Tank)
    • (5) Stainless Steel Tank Penetration Fittings (TPF)
    • (5) Specially extruded 30" straight nylon tubes attached to Tank Penetration Fittings
    • (5) Extensions Tubes (For Deeper Tanks)
    • Mounting hardware
    • Installation manual

    General Features:

    • The Hart Tank Tender uses air pressure to provide accurate level readings (+/-1% at mid-scale on a proper installation) for up to (10) water, diesel and holding tanks
    • No electrical connection necessary
    • Choosing a Tank Tender:
      • As an example, a typical 4-tank installation may measure the levels of (1) Diesel fuel tank, (1) Waste holding tank and (2) Water tanks
    • Gauges are calibrated in inches for diesel and water
    • Monitoring waste holding tanks is possible with the optional "Purge" toggle switch valve
      • The Purge toggle switch valve clears the waste holding tank's Tank Penetration Fitting (TPF) tubes before taking readings
    • System conveniently allows you to check all tank levels with one instrument from one onboard location
    • Simple, completely self-contained pneumatic operation:
      • Select tank to be measured
      • Pump small amount of air through tubing to bottom of the selected tank
      • When air pressure in the tube equals the liquid pressure at the bottom of the tank, gauge displays pressure in inches of liquid
    • Package includes: Tank Tender Gauge with Panel, Nylon Tubing and all fittings required for installation (Some Include Optional Purge Valve)
      • Monitoring waste holding tanks is possible with the optional "Purge" toggle switch valve
    • System components:
      • (1) Instrument panel set up for appropriate number of tanks
        • Gauge Selection – Select gauge with margin of safety regarding tank depth
          • For example, use 30 / 35" gauge if your tank is 20" deep; for a tank that is 40" deep, use 60 / 70" gauge
      • (30') of 1/8" OD nylon tubing per tank (Sold as continuous roll)
      • (1) Stainless steel Tank Penetration Fitting (TPF) per tank with specially extruded 30" straight nylon tube
        • Tank Penetration Fitting Extender
          • Each 60 / 70" Tank Tender system also includes (1) 30" TPF Extender per tank
          • This component consists of a 30" length of straight nylon tube with a stainless steel stiffening wire inside and a brass barb on one end that fits into the end of the TPF tube
          • Additional 30" lengths are available for further extending the TPF for even deeper tanks
      • Mounting hardware
    • System is convenient, reliable, inexpensive and easy to install
      • Tanks can be located up to 1000 ft. from Tank Tender unit
      • System is built with corrosion-resistant materials including brass and stainless steel
    Hart Tank Tender 1 to 5 Tank Monitor System with Purge Valve Option
    962.99
    Note:  This item ships from the manufacturer.
    It typically ships within 2 business days  (more...)
    Status:   null Ships Direct

     

    shipping delay


    Package Includes:

    • (1) 5-Tank Tender (60 / 70" Gauge with 6" x 4" panel) with Purge Valve
    • (1) 150 foot Roll of 1/8" OD nylon tubing (30' for each Tank)
    • (5) Stainless Steel Tank Penetration Fittings (TPF)
    • (5) Specially extruded 30" straight nylon tubes attached to Tank Penetration Fittings
    • (5) Extensions Tubes (For Deeper Tanks)
    • Mounting hardware
    • Installation manual

    General Features:

    • The Hart Tank Tender uses air pressure to provide accurate level readings (+/-1% at mid-scale on a proper installation) for up to (10) water, diesel and holding tanks
    • No electrical connection necessary
    • Choosing a Tank Tender:
      • As an example, a typical 4-tank installation may measure the levels of (1) Diesel fuel tank, (1) Waste holding tank and (2) Water tanks
    • Gauges are calibrated in inches for diesel and water
    • Monitoring waste holding tanks is possible with the optional "Purge" toggle switch valve
      • The Purge toggle switch valve clears the waste holding tank's Tank Penetration Fitting (TPF) tubes before taking readings
    • System conveniently allows you to check all tank levels with one instrument from one onboard location
    • Simple, completely self-contained pneumatic operation:
      • Select tank to be measured
      • Pump small amount of air through tubing to bottom of the selected tank
      • When air pressure in the tube equals the liquid pressure at the bottom of the tank, gauge displays pressure in inches of liquid
    • Package includes: Tank Tender Gauge with Panel, Nylon Tubing and all fittings required for installation (Some Include Optional Purge Valve)
      • Monitoring waste holding tanks is possible with the optional "Purge" toggle switch valve
    • System components:
      • (1) Instrument panel set up for appropriate number of tanks
        • Gauge Selection – Select gauge with margin of safety regarding tank depth
          • For example, use 30 / 35" gauge if your tank is 20" deep; for a tank that is 40" deep, use 60 / 70" gauge
      • (30') of 1/8" OD nylon tubing per tank (Sold as continuous roll)
      • (1) Stainless steel Tank Penetration Fitting (TPF) per tank with specially extruded 30" straight nylon tube
        • Tank Penetration Fitting Extender
          • Each 60 / 70" Tank Tender system also includes (1) 30" TPF Extender per tank
          • This component consists of a 30" length of straight nylon tube with a stainless steel stiffening wire inside and a brass barb on one end that fits into the end of the TPF tube
          • Additional 30" lengths are available for further extending the TPF for even deeper tanks
      • Mounting hardware
    • System is convenient, reliable, inexpensive and easy to install
      • Tanks can be located up to 1000 ft. from Tank Tender unit
      • System is built with corrosion-resistant materials including brass and stainless steel







    Documentation available at the following links:

     
     

    Have A Suggestion?


    This form is intended to improve the current product page. For Customer Service, please click here

    Help us make our site better for everyone! Let us know you've found something wrong or frustrating on this page and we will improve it. Please mark each that apply.










    Comments or Examples:
    Examples: Missing information such as dimensions and model number, typos, inaccuracies, etc...

                





           
    Defender Email Specials
    Click Here For Our Privacy Policy
     
    null