Seaview Cable Gland - Gray ABS Plastic - 1 or 2 Cables

Features:

• Seaview Retrofit Cable Glands provide waterproof cable routing
• Seaview Split Cable Glands
  • Work easily if the cable is already installed or you have a new installation
• The Seaview Retrofit Cable Gland makes for a very easy assembly to new or old cable installations
  • Split-seal option does not require connector removal during install, however you still have to consider cable diameter
    • You cannot use solid cable glands with currently installed cables, you would have to re-run your cables
• Each cable gland is supplied with a blank rubber seal that has a molded location to drill and cut
• Captive nuts make for easy assembly
• Cable connectors do not need to be removed during installation
• The only guaranteed and proven watertight installation for your currently installed cables
• These Retrofit Cable Glands provide a watertight installation for your currently installed cables
• No need to re-run your cables, simply install with your cable in place
• These Seaview Retrofit Cable Glands provide a waterproof pass-through for antenna, transducer, lights, power and other cables without removal of the factory installed cable connector
• Applications: Watertight installation of Marine Cables
  • Tapered rubber seal forms watertight installation
  • Base gasket also provided for clean water tight installation
• Low profile design for a strong, impact-resistant and clean installation (no sharp edges to hit your foot on)
• Unlike other brands, Seaview's inner rubber seal is flush with the top of the cable gland so that water does not have a place to collect
• Waterproof: IPX6 and IPX7 tested and approved
  • IPX6 test means these pass 100L/min of water sprayed from 2.5 to 3 meters away for 3 min.
  • IPX7 test means these pass a 30 minute submersion under 1 meter of water