Raymarine AIS700 Class B AIS Transceiver w/ Built-in Splitter - 5 W SOTDMA
E70476

Important Information Regarding the Purchase of a Class B AIS: This required form must be sent to Defender Industries via e-mail customerservice@defender.com or faxed along with a copy of your MMSI registration before your order can be processed. Our fax number is 860-701-3432. IMPORTANT NOTICE: |
The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems. As a Class B AIS transceiver, the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat's information too helping you to be seen on other vessels' systems
Features:
- Full transmit and receive AIS for enhanced situational awareness and safety
- Latest SO-TDMA networking for longer range and faster performance
- Built-in antenna splitter simplifies installation with existing VHF radio antenna
- NMEA2000, NMEA0183, PC and SeaTalkng Compatible
- Software or hardware switchable Silent Mode for enhanced security when needed
Click Here for an Owner's Manual and Installation Guide for this Product
Specifications:
Power
- Operating voltage range: 9.6 Volt DC to 31.2 Volt DC
- Power consumption: <3 Watt
- Fuse rating: 3 Amp
- LEN (Load Equivalency Number): 1
Environmental
- Operating temperature range: -15° C to +55° C (+5° F to +131° F)
- Storage temperature range: -20° C to +75° C (-4° F to 167° F)
- Humidity: 93% at 40° C
- Waterproofing: IPx6, IPx7
AIS specification
- Transmitter: (1)
- Receiver: (2)
- Operating frequency range
- Transmitting: 156.0MHz to 162.025 MHz
- Receiving: 156.0MHz to 174.0 MHz
- Channel spacing: 25 KHz
- AIS performance: 5 Watt SOTDMA
GNSS receivers
- Channels: 72
- Cold start acquisition: 26 seconds (nominal)
- Position source
- GPS
- GLONASS
External connections
- VHF antenna connector type: SO-239 co-axial
- VHF radio connector type SO-239 co-axial
- GNSS antenna connector type: 50Ω TNC co-axial
- SeaTalkng / NMEA 2000 connector type: 5-way DeviceNet male
- Power and NMEA 0183: 12-way bare ended wires
- NMEA 0183 port 1 (MFD connection)
- NMEA 0183 HS (IEC 61162–1) compliant, bi-directional, RS422 levels, 4 wire interface (differential signaling), configurable baud rate
- NMEA 0183 port 2 (Instrument connection)
- NMEA 0183 (IEC 61162–1) compliant, bi-directional, RS422 levels, 4 wire interface (differential signaling), configurable baud rate
- Power: 2-way bare ended wires
- Silent mode switch: 2-way bare ended wires
- USB: Micro-B
- Earth stud: Threaded stud (nut and washer supplied)
In the Box:
- Raymarine AIS700 Class B Automatic Identification System (AIS) Transceiver
- GNSS antenna
- GNSS antenna mounting hardware (3 x M3x40 stud and thumb nut)
- GNSS antenna gasket
- GNSS antenna pole mount
- Power/data cable 2 meter (6.56 ft)
- VHF Radio cable 1 meter (3.28 ft)
- DeviceNet to SeaTalkng adaptor cable 1 meter (3.28 ft)
- Unit mounting hardware (4 x No.8x19 self tapping screws)
- M5 nut and washer (grounding)
- Documentation
- Software CD
Item #: 257550