Raymarine EV-150 Power Pilot Core Pack

Package Includes:

• ACU-150 Autopilot Actuator Control Unit
• p70Rs Autopilot Controller / Power Head
  • Black and gunmetal bezels
  • Fitted soft silicone rubber sun cover
  • 400 mm SeaTalk ^ng spur cable
  • Panel gasket
  • Mounting kit
  • Document pack
• Evolution EV-1 Sensor Core
• R70160 Evolution Cabling Kit
  • 1 SeaTalk^ng Power Cable (0.4m)
  • 1 SeaTalk^ng Backbone Cable (5m)
  • 1 SeaTalk^ng Spur Cable (0.4m)
  • 1 SeaTalk^ng 5-way Connector Block
  • 2 SeaTalk^ng T-piece Connector
  • 2 SeaTalk^ng Terminator

Note: Requires Type-1 Hydraulic Drive Unit (M81120) (Sold Separately)

Note: Evolution Autopilots communicate via SeaTalk^ng . A SeaTalk^ng to NMEA Converter Kit ( E22158 ) may be required to connect older Raymarine or non-Raymarine displays. Raymarine Software version 1.21 is also a minimum requirement.

ACU-150 Features:

• Raymarine ACU-150 is an Actuator Control Unit
• Applications: Raymarine Type-1 Hydraulic Drive Unit (M81120) (Sold Separately)
• Power: 12 Volt DC (Only)
• Connections: SeaTalkng Network, Optional Rudder Reference Unit
• Raymarine ACU-150 is a component of the Evolution™ Autopilot system
• Applications: Provides power and control to a Raymarine Type-1 Hydraulic Drive Unit (M81120)
• ACU-150 connects to SeaTalk^ng network for communication with its other peripherals
• Works on 12-volt DC systems only
• A complete ACU-150 autopilot system requires:
  • Type-1 Hydraulic Drive Unit (M81120) (Sold Separately)
  • Evolution EV1 Sensor Core (E70096) Included in this Kit
  • Evolution Cable Kit (R70160) Included in this Kit
  • Autopilot Control Head: p70Rs (E70329) Included in this Kit

p70Rs Features:

• Raymarine P70Rs is an Autopilot Controller with Rotary Knob
• Type: Wired Remote
• Applications: Raymarine Autopilot Systems
• Provides Auto, Standby, Pattern, Track, Wind Vane, Power and Jog Steer
• SeaTalk^ng/NMEA 2000 and SeaTalk¹ Connection
• Raymarine's p70Rs Autopilot Controller keeps you in command of your SmartPilot autopilot system no matter whether you are cruising, fishing or sailing
• P70Rs autopilot controller offers boaters an attractive, high-visibility, and simple-to-operate interface to their Raymarine SmartPilot X-Series and Evolution autopilot systems
• Convenient, rotary control knob and support for multiple autopilot modes including auto, standby, trolling patterns, and track mode from your GPS or chartplotter
• Exclusive to the p70Rs is a convenient Power Steer mode, which enables you to use the p70R's rotary knob like a miniature steering wheel. P70Rs provides convenient, compact steering control to auxiliary steering stations, flybridges, wing control stations and more
• P70Rs features standard SeaTalk^ng connectivity for simple interfacing with Raymarine SmartPilot X-Series and Evolution autopilot corepacks
• The p70Rs features a 3.5" sunlight viewable Liquid Crystal Display
• LED backlighting delivers superior visibility day or night and ultra-low power consumption
• Like the i70s instrument, the p70Rs features a clean, modern, glass-bridge styling that coordinates with eS and gS-Series multifunction displays
• All-weather, optically bonded displays deliver brighter colors and sharper contrast
• LightHouse user interface is simple and quick to use
• Wide 160 viewing angles
• Start-up wizard helps you configure the pilot quickly and easily
• Anti-reflective coating for improved visibility in bright sunlight
• Low power — typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness
• Supported autopilot modes: Auto, Standby, Pattern, Track, Wind Vane, Power Steer and Jog Steer Simple system and group dimming/illumination
• Support for multiple data sources
• SeaTalk^ng / NMEA 2000 and SeaTalk¹ connectivity (no bridging required)
• p70Rs includes both black and gunmetal bezels as well as a fitted soft silicone rubber sun cover, 400mm Seatalk^ng spur cable, panel gasket, mounting kit and document pack.

Raymarine EV-1 Sensor Core Features:

At the center of every Evolution system is the intelligent Evolution EV-1 Sensor Core , a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced, solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing, eliminating the need for complicated set up and calibration. Once Evolution is installed, getting started is as easy as switching the autopilot on. Thanks to the intelligent EV sensor core, the autopilot automatically evolves and adapts to your vessel's steering characteristics without any user adjustments.

The EV-1 Sensor Core is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalk^ng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalk^ng and NMEA 2000 networks. Mount the EV-1 sensor core above or below decks; the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.

Features of the EV-1:

• Precision monitoring of heading, pitch, roll, and yaw
  • Allows autopilot to evolve instantly as sea conditions and vessel dynamics change
• Flexible installation options
  • Mount above or below deck
• Simple SeaTalk^ng connectivity to the control head and ACU
• Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions
• Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes
• Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays

The Evolution Cabling Kit includes SeaTalk^ng cables, connectors and terminators needed to complete the install of your Evolution Autopilot system.

Cabling Kit Includes:

• 1 SeaTalk^ng Power Cable (0.4m)
• 1 SeaTalk^ng Backbone Cable (5m)
• 1 SeaTalk^ng Spur Cable (0.4m)
• 1 SeaTalk^ng 5-way Connector Block
• 2 SeaTalk^ng T-piece Connector
• 2 SeaTalk^ng Terminator