Defender Home Page
Phone: 800-628-8225 Fax: 800-654-1616 Int'l.: 860-701-3400 Email: Contact Us
follow me on facebook
Shipping Info
no sales tax Defender Home Page
Your Cart

View Cart View Shopping Cart
Check My Order(s)
Track My Package(s)
Conversion Chart
Shopping Areas
Boats & Motors
 Defender Seal
Teleflex QCII Replacement Steering Cable
Buy Now While this Item is Still Available!

Teleflex QCII Replacement Steering Cable

  • Length: 9 Feet
  • Designed for Teleflex Rotary Steering Systems ( 1968 to Present)
  • Works with Safe-T QC / TS Big-T and NFB Systems
  • Item #: 
    SeaStar / Teleflex
    Model #: 
    Shipping Weight: 
    6.10 Lbs.
    Our Price:
    Status:    In Stock


    One style of cable fits most Teleflex Rotary Steering Systems from 1968 to present. The SSC61 Series cables will replace the SSC62 and SSC72 Series cables. If you have a Safe-T-QC (Quick Connect), NFB (No Feedback), Safe-T QC (Threaded Spigot) or Big-T System, the SSC61 will replace them all. Choose your correct cable length, in feet.*


    • Designed for Rotary steering systems*
    • Exceeds ABYC Safety Standards
    • Exceed ISO/IMCI/NMMA Certification Requirements
    • Tightly controlled core to conduit fit offers precise steering
    • Outer jacket constructed with HDPE (a high density ployethylene material) that is abrasion Rresistant and provides a high resitence to water penetration
    • Output ends are constructed of stainless steel material

    * Note: These cables are not designed to replace Rack Style System cables.

    * Determining Proper Steering Cable Length

    • Replacing an Existing Steering Cable:
      • The cable part number and length can usually be found about 2 feet from the helm connection
        • Stamped into the plastic conduit (exterior jacket or casing)
          • If you can't locate/read it, proceed to the next step
      • Determine what Type of cable is being Replaced
        • Rotary (spiral wrapped black core wire sticks out at helm end of cable)
        • Rack and Pinion (Cable has long metal housing with rack [flat] gear inside)?
      • Measure the Existing Cable as Follows:
        • First Measure the cable’s plastic jacket (casing) in inches
          • Rotary Style: Add 18” (Round up to the next foot)
          • Rack & Pinion Style: Add 30” (Round up to the next foot)
    • First-Time Steering Cable Installation
      • Measure Cable Routing Path in Boat as Follows:
        • A = Center line of wheel to gunwale (inches)
        • B = Dash to transom (inches)
        • C = Gunwale to cable connection at centered tiller (inches)
      • For Tilt Tube Mounting
        • Add A, B & C + 6”, then round up to the next whole foot
        • Order that length cable
      • For Transom / Splash-well Stringer Support Mounting
        • Add A, B & C, then subtract 6” and round up to the next whole foot
        • Order that length of cable.
    WARNING: This product MAY expose you to chemicals, which are known to the State of California to cause cancer, birth defects and/or other reproductive harm. For more information go to


    Have A Suggestion?

    Help us make our site better for everyone! Let us know you've found something wrong or frustrating on this page and we will improve it. Please mark each that apply.

    Product has been improperly categorized
    Page loads too slowly
    Product information is incorrect
    Page has errors or bugs
    Site is frustrating or difficult to use
    Product image is missing or wrong
    Cannot find my size
    Spelling errors on page
    Not enough product information

    Comments or Examples:
    Examples: Missing information such as dimensions and model number, typos, inaccuracies, etc...

    Please include your e-mail address below if you would like us to respond to your comments or questions.             

    Join Our Email List And Receive our Monthly Promotions
    Defender Email Specials
    Click Here For Our Privacy Policy