Defender Home Page
Call or email to speak with our In-House Technical Staff/Advisors
Phone: 800-628-8225 Int'l.: 860-701-3400 Email: Contact Us
Follow us on Facebook
Shipping Info
Defender Home Page
Your Cart
null
null
null View Cart View Shopping Cart
null Check My Order(s)
null Track My Package(s)
Metric/Inch
Conversion Chart
Categories
Shopping Areas
Information
Boats & Motors
null Defender Seal null
promo A
promo B
promo C
promo D
 
 

Awlgrip Fast Evaporating Topcoat Spray Reducer - Spray Applications

  • Applications: Spray Applied Awlgrip, Awlcraft 2000 and Awlgrip SE Topcoats
  • Function: Keeps Paint Film Open with Faster Drying and Dust Free Time
  • Temperature Range: 60° F to 95° F, Container Size: Quart
  • Item #: 
    756917REDQUA
    Brand: 
    Awlgrip
    Model #: 

    T0001

    Packaged Weight: 
    2.15 Lbs.
    Our Price:
    $20.99
    756917REDQUA Awlgrip Awlgrip Fast Evaporating Topcoat Spray Reducer - Spray Applications T0001

    T0001 is usually used in Awlgrip and Awlcraft 2000 Topcoats. T0001 is also recommended for use in Quik-Grip Primer. Awlgrip reducers are chosen according to spray or brush application and anticipated temperature.

    Use T0001 in AWLGRIP® / AWLCRAFT® 2000 Top coats when application and cure temperatures are between 60°F to 70°F (16°C to 21°C) and 80°F to 90°F (27°C to 32°C). At 60°F to 70°F (16°C to 21°C), T0001 will keep the paint film open for good flow but evaporate fast enough to provide adequate dry and dust-free times. At higher temperatures, the solvency of T0001 helps maximize atomization. Its fast evaporation rate allows the solvent to exit the film before skinning occurs, avoiding solvent entrapment or solvent "pop"

    General Information:

    All of the listed reducers for Awlgrip and Awlcraft 2000 Topcoats can be blended with each other in any ratio to fine tune flow and
    evaporation rates. Most Awlgrip and Awlcraft 2000 Topcoats recommend up to 25% reduction. The reduction percentage is calculated
    from the combined total of the base component and converter component. Mixing a quart of base and a quart of converter yields 2
    quarts of mixed base and converter: 25% would be 1/2 quart of reducer.

    Examples of total mix quantities for 1:1 and 2:1 base to converter ratios are as follows:

    • 1:1 mix products
      • Reduction: 25%
      • Color Base 12 oz.
      • Converter 12 oz.
      • Reducer 6 oz.
      • Total Mix 30 oz.
    • 2:1 mix products
      • Reduction: 25%
      • Color Base 12 oz.
      • Converter 6 oz.
      • Reducer 4.5 oz.
      • Total Mix 22.5 oz.

    For specific reduction recommendations see individual product data sheets.

    NOTE: At higher temperatures, reducers evaporate faster. When painting in hot conditions increasing the amount of reducer in the mix by 5-10% will help compensate for this factor.

    Awlgrip Fast Evaporating Topcoat Spray Reducer - Spray Applications
    20.99
    Status:  null In Stock

     

    shipping delay

     

    Warning This product ships ground only


    T0001 is usually used in Awlgrip and Awlcraft 2000 Topcoats. T0001 is also recommended for use in Quik-Grip Primer. Awlgrip reducers are chosen according to spray or brush application and anticipated temperature.

    Use T0001 in AWLGRIP® / AWLCRAFT® 2000 Top coats when application and cure temperatures are between 60°F to 70°F (16°C to 21°C) and 80°F to 90°F (27°C to 32°C). At 60°F to 70°F (16°C to 21°C), T0001 will keep the paint film open for good flow but evaporate fast enough to provide adequate dry and dust-free times. At higher temperatures, the solvency of T0001 helps maximize atomization. Its fast evaporation rate allows the solvent to exit the film before skinning occurs, avoiding solvent entrapment or solvent "pop"

    General Information:

    All of the listed reducers for Awlgrip and Awlcraft 2000 Topcoats can be blended with each other in any ratio to fine tune flow and
    evaporation rates. Most Awlgrip and Awlcraft 2000 Topcoats recommend up to 25% reduction. The reduction percentage is calculated
    from the combined total of the base component and converter component. Mixing a quart of base and a quart of converter yields 2
    quarts of mixed base and converter: 25% would be 1/2 quart of reducer.

    Examples of total mix quantities for 1:1 and 2:1 base to converter ratios are as follows:

    • 1:1 mix products
      • Reduction: 25%
      • Color Base 12 oz.
      • Converter 12 oz.
      • Reducer 6 oz.
      • Total Mix 30 oz.
    • 2:1 mix products
      • Reduction: 25%
      • Color Base 12 oz.
      • Converter 6 oz.
      • Reducer 4.5 oz.
      • Total Mix 22.5 oz.

    For specific reduction recommendations see individual product data sheets.

    NOTE: At higher temperatures, reducers evaporate faster. When painting in hot conditions increasing the amount of reducer in the mix by 5-10% will help compensate for this factor.

     
     

     
     

    Have A Suggestion?


    This form is intended to improve the current product page. For Customer Service, please click here

    Help us make our site better for everyone! Let us know you've found something wrong or frustrating on this page and we will improve it. Please mark each that apply.










    Comments or Examples:
    Examples: Missing information such as dimensions and model number, typos, inaccuracies, etc...

                





           
    Defender Email Specials
    Click Here For Our Privacy Policy
     
    null