Item #871092

Jabsco Radial Flexmount Ventilation Blower

00 Review
$126.99 - $291.99
                  Want an email once available?
                  Buy with

                  Image of : Jabsco Radial Flexmount Ventilation Blower Jabsco Radial Flexmount Ventilation Blower Item # 871092

                  Description

                  The Jabsco Flexmount Blowers provide high volume air intake or extraction and are primarily intended for intermittent duty cycles. This type of mount enables the outlet to adjust 360-degrees.

                  Features:

                  • Provides high volume air intake or extraction
                  • Primarily intended for intermittent duty cycles
                    • May be used for longer duty cycles but the maximum motor life is approximately 1,000 hours
                  • Flexmount allows 360-degree adjustable outlet
                  • Slip-on inlet and outlet ducting connections
                  • Dimensionally stable, quiet running Delrin rotors
                  • Corrosion resistant materials throughout
                  • Ignition protected: DC models comply with USCG 183.410 and ISO 8846 MARINE
                  • AC models are not ignition protected and do not comply with ISO 9097
                  • DC models are listed as NMMA type Accepted and comply with ISO 9097 MARINE (requirements for measuring airflow of fans intended for use in engine compartments, similar spaces)
                  • Jabsco recommends keeping blowers away from areas exposed to direct heat exceeding 130°F (55°C)

                  12V/105 CFM Blower

                  • Ducting Connection: 3" (75 mm)
                  • Dimmensions (L x H x W): 6 3/4" x 5 1/2" x 5" (170 x 140 x 130 mm)
                  • Fuse Size: 6A

                  12V/140 CFM Blower

                  • Ducting Connection: 3" (75 mm)
                  • Dimmensions (L x H x W): 8" x 9" x 8 1/4" (220 x 230 x 220 mm)
                  • Fuse Size: 10A

                  12V/250 CFM Blower

                  • Ducting Connection: 4" (100 mm)
                  • Dimmensions (L x H x W): 9 1/8" x 9 5/8" x 9 3/16" (230 x 250 x 240 mm)
                  • Fuse Size: 12A

                  24V/150 CFM Blower

                  • Ducting Connection: 3" (75 mm)
                  • Dimmensions (L x H x W): 8" x 9" x 8 1/4" (220 x 230 x 220 mm)
                  • Fuse Size: 5A

                  24V/250 CFM Blower

                  • Ducting Connection: 4" (100 mm)
                  • Dimmensions (L x H x W): 9 1/8" x 9 5/8" x 9 3/16" (220 x 230 x 220 mm)
                  • Fuse Size: 7.5A

                  Note: Actual blower may vary slightly from images shown.

                  Data Sheet

                  WARNING

                  This product can expose you to chemicals including Nickel (Metallic) which are known to the State of California to cause cancer, birth defects or other reproductive harm.

                  For more information go to www.p65warnings.ca.gov.

                  Part Numbers for Jabsco Radial Flexmount Ventilation Blower

                  Related Categories

                  Related Categories

                  Reviews

                  • bvseo_sdk, p_sdk, 3.2.1
                  • CLOUD, getReviews, 26.74ms
                  • REVIEWS, PRODUCT
                  • bvseo-msg: HTTP status code of 404 was returned;

                  Questions

                  • bvseo_sdk, p_sdk, 3.2.1
                  • CLOUD, getContent, 62.69ms
                  • QUESTIONS, PRODUCT
                  • bvseo-msg: HTTP status code of 404 was returned;