Cart   null      null
Track Orders
Customer Service
My Account
Logo linked to Defender Homepage
Most Orders Placed Mon - Fri by 4:30 PM ET Ship Same Day!
Call or email to speak with our in-house knowledgeable staff.
Phone: 800-628-8225 | Int'l.: 860-701-3400 | Email: Contact Us
promo A
promo B
promo C
promo D
 

Rule-Mate RM2000A Automatic Bilge Pump - 12 Volt DC 8.4 Amp

  • Flow Rate: 2000 GPH, Port Size: Threaded 1" NPSM (Hose Barbs Included *)
  • Nominal Voltage: 12 Volt DC, Current Draw: 8.4 Amps, Fuse: 15 Amp
  • Pump and Electronic Water Sensing Device in a Single, Compact Housing
  • Item #: 
    50371212V200
    Brand: 
    Rule
    Model #: 

    RM2000A 12V

    Packaged Weight: 
    4.20 Lbs.
    Our Price:
    $259.99
    50371212V200 Rule Rule-Mate RM2000A Automatic Bilge Pump - 12 Volt DC 8.4 Amp RM2000A 12V

    Features:

    • Powerful bilge pump and a new non-mercury float switch in a single housing
    • While fully automated, the pump will only turn on when the water level rises
    • There is no cycling and battery drain
    • The pump remains off until the internal float switch rises
    • The pump then stays on until the water is evacuated
    • The pump's internal computer senses no load (water) against the impeller and then shuts off
    • Quick release inlet strainer allows rapid cleaning
      • A detachable strainer provides easy access to the impeller area for removal of debris
    • For medium sized yachts and motor cruisers
    • Improved Switching with a Protective Mode
      • Upgraded on/off mechanism
      • The previous design activates the pump using a magnet in a float “cube” and a reed switch to sense the water around the pump
      • Water is sensed by an interruption in an electromagnetic field generated by the new circuit board
      • To turn the pump off, the circuit board senses the amount of work the motor is doing (via amp draw) and once the circuit board senses the motor is doing less work, the board turns off the pump
      • The circuit board includes a fail-safe feature which measures the amount of work the motor is performing and the length of time the motor is running
      • If debris, such as a wet paper towel, becomes lodged against the pump, it could “trick” the pump into thinking water remained in the bilge which could deplete the vessel's battery
      • When the circuit board senses the motor's running but not pumping water for longer than fifteen seconds, the pump will enter into a cycling mode in the same fashion as the computerized pumps
      • The pumps turn off and activate the motor every two and a half minutes and if it senses water, it will continue to run until the water has been removed from the bilge
      • After the debris is removed, the pump will automatically revert to the level sensing mode

    For further details see Installation Guide

    Specifications:

    • Fully automated bilge pump with integral float switch
    • Tough plastic body
    • Low amp draw conserves batteries
    • Ignition protected
    • Outlet Port Size: Threaded 1" NPSM with 1" and 1-1/8" Straight Hose Barbs Included
      • Optional 1" and 1-1/8", 90º Elbows Available (Sold Separately)
    • Dimensions: 150 mm L x 150 mm H x 110 mm W
    • Power: 12 Volt DC
    • Draw: 4.8 Amps
    • Fuse Size: 9 amp
    • Output: Up to 95 liters/minute (21 gallons/minute)
    • Outlet: Threaded 1" NPSM port
      • Accepts the included 1” and 1-1/8” hose barb ports as well as the optional 1” and 1 1/8” 90º elbows (sold separately)
    • Max. recommended discharge head 2 meters
    • Replaces: Rule RM-2000

    Available Models:

    • RM2000A-12 = 12 Volt DC
    • RM2000A-24 = 24 Volt DC
    Rule-Mate RM2000A Automatic Bilge Pump - 12 Volt DC 8.4 Amp
    259.99
     
    Status:    null In Stock

     
    Shipping is delayed due to the high volume

     

    Features:

    • Powerful bilge pump and a new non-mercury float switch in a single housing
    • While fully automated, the pump will only turn on when the water level rises
    • There is no cycling and battery drain
    • The pump remains off until the internal float switch rises
    • The pump then stays on until the water is evacuated
    • The pump's internal computer senses no load (water) against the impeller and then shuts off
    • Quick release inlet strainer allows rapid cleaning
      • A detachable strainer provides easy access to the impeller area for removal of debris
    • For medium sized yachts and motor cruisers
    • Improved Switching with a Protective Mode
      • Upgraded on/off mechanism
      • The previous design activates the pump using a magnet in a float “cube” and a reed switch to sense the water around the pump
      • Water is sensed by an interruption in an electromagnetic field generated by the new circuit board
      • To turn the pump off, the circuit board senses the amount of work the motor is doing (via amp draw) and once the circuit board senses the motor is doing less work, the board turns off the pump
      • The circuit board includes a fail-safe feature which measures the amount of work the motor is performing and the length of time the motor is running
      • If debris, such as a wet paper towel, becomes lodged against the pump, it could “trick” the pump into thinking water remained in the bilge which could deplete the vessel's battery
      • When the circuit board senses the motor's running but not pumping water for longer than fifteen seconds, the pump will enter into a cycling mode in the same fashion as the computerized pumps
      • The pumps turn off and activate the motor every two and a half minutes and if it senses water, it will continue to run until the water has been removed from the bilge
      • After the debris is removed, the pump will automatically revert to the level sensing mode

    For further details see Installation Guide

    Specifications:

    • Fully automated bilge pump with integral float switch
    • Tough plastic body
    • Low amp draw conserves batteries
    • Ignition protected
    • Outlet Port Size: Threaded 1" NPSM with 1" and 1-1/8" Straight Hose Barbs Included
      • Optional 1" and 1-1/8", 90º Elbows Available (Sold Separately)
    • Dimensions: 150 mm L x 150 mm H x 110 mm W
    • Power: 12 Volt DC
    • Draw: 4.8 Amps
    • Fuse Size: 9 amp
    • Output: Up to 95 liters/minute (21 gallons/minute)
    • Outlet: Threaded 1" NPSM port
      • Accepts the included 1” and 1-1/8” hose barb ports as well as the optional 1” and 1 1/8” 90º elbows (sold separately)
    • Max. recommended discharge head 2 meters
    • Replaces: Rule RM-2000

    Available Models:

    • RM2000A-12 = 12 Volt DC
    • RM2000A-24 = 24 Volt DC

    This Pump carries a Five-Year Warranty from the Date of Purchase

     
     

     
     

    Have A Suggestion?

     
           
    Defender Email Specials
    Click Here For Our Privacy Policy
    null