Defender Home Page
Phone: 800-628-8225 Int'l.: 860-701-3400 Email: Contact Us
Follow us on Facebook
Shipping Info
Defender Home Page
Your Cart
null
null
null View Cart View Shopping Cart
null Check My Order(s)
null Track My Package(s)
Metric/Inch
Conversion Chart
Categories
Shopping Areas
Information
Boats & Motors
null Defender Seal null
promo A
promo B
promo C
promo D
 
 

Rule-Mate RM2000A Automatic Bilge Pump

  • Flow Rate: 2000 GPH, Port Size: Threaded 1" NPSM (Hose Barbs Included *)
  • Nominal Voltage: 24 Volt DC, Current Draw: 4.2 Amps, Fuse: 7 Amp
  • Pump and Electronic Water Sensing Device in a Single, Compact Housing
  • Item #: 
    50371224V200
    Brand: 
    Rule
    Model #: 

    RM2000A-24 24V

    Shipping Weight: 
    4.50 Lbs.
    Our Price:
    $227.99
    50371224V200 Rule Rule-Mate RM2000A Automatic Bilge Pump RM2000A-24 24V

    Features:

    • Powerful bilge pump and a new non-mercury float switch in a single housing
    • While fully automated, the pump will only turn on when the water level rises
    • There is no cycling and battery drain
    • The pump remains off until the internal float switch rises
    • The pump then stays on until the water is evacuated
    • The pump's internal computer senses no load (water) against the impeller and then shuts off
    • Quick release inlet strainer allows rapid cleaning
      • A detachable strainer provides easy access to the impeller area for removal of debris
    • For medium sized yachts and motor cruisers
    • Improved Switching with a Protective Mode
      • Upgraded on/off mechanism
      • The previous design activates the pump using a magnet in a float “cube” and a reed switch to sense the water around the pump
      • Water is sensed by an interruption in an electromagnetic field generated by the new circuit board
      • To turn the pump off, the circuit board senses the amount of work the motor is doing (via amp draw) and once the circuit board senses the motor is doing less work, the board turns off the pump
      • The circuit board includes a fail-safe feature which measures the amount of work the motor is performing and the length of time the motor is running
      • If debris, such as a wet paper towel, becomes lodged against the pump, it could “trick” the pump into thinking water remained in the bilge which could deplete the vessel's battery
      • When the circuit board senses the motor's running but not pumping water for longer than fifteen seconds, the pump will enter into a cycling mode in the same fashion as the computerized pumps
      • The pumps turn off and activate the motor every two and a half minutes and if it senses water, it will continue to run until the water has been removed from the bilge
      • After the debris is removed, the pump will automatically revert to the level sensing mode

    For further details see Installation Guide

    Specifications:

    • Fully automated bilge pump with integral float switch
    • Tough plastic body
    • Low amp draw conserves batteries
    • Ignition protected
    • Outlet Port Size: Threaded 1" NPSM with 1" and 1-1/8" Straight Hose Barbs Included
      • Optional 1" and 1-1/8", 90º Elbows Available (Sold Separately)
    • Dimensions: 150 mm L x 150 mm H x 110 mm W
    • Power: 12 Volt DC
    • Draw: 4.8 Amps
    • Fuse Size: 9 amp
    • Output: Up to 95 liters/minute (21 gallons/minute)
    • Outlet: Threaded 1" NPSM port
      • Accepts the included 1” and 1-1/8” hose barb ports as well as the optional 1” and 1 1/8” 90º elbows (sold separately)
    • Max. recommended discharge head 2 meters
    • Replaces: Rule RM-2000

    Available Models:

    • RM2000A-12 = 12 Volt DC
    • RM2000A-24 = 24 Volt DC
    Rule-Mate RM2000A Automatic Bilge Pump
    227.99
    Status:    null In Stock

    Quantity : 
     


     

    Features:

    • Powerful bilge pump and a new non-mercury float switch in a single housing
    • While fully automated, the pump will only turn on when the water level rises
    • There is no cycling and battery drain
    • The pump remains off until the internal float switch rises
    • The pump then stays on until the water is evacuated
    • The pump's internal computer senses no load (water) against the impeller and then shuts off
    • Quick release inlet strainer allows rapid cleaning
      • A detachable strainer provides easy access to the impeller area for removal of debris
    • For medium sized yachts and motor cruisers
    • Improved Switching with a Protective Mode
      • Upgraded on/off mechanism
      • The previous design activates the pump using a magnet in a float “cube” and a reed switch to sense the water around the pump
      • Water is sensed by an interruption in an electromagnetic field generated by the new circuit board
      • To turn the pump off, the circuit board senses the amount of work the motor is doing (via amp draw) and once the circuit board senses the motor is doing less work, the board turns off the pump
      • The circuit board includes a fail-safe feature which measures the amount of work the motor is performing and the length of time the motor is running
      • If debris, such as a wet paper towel, becomes lodged against the pump, it could “trick” the pump into thinking water remained in the bilge which could deplete the vessel's battery
      • When the circuit board senses the motor's running but not pumping water for longer than fifteen seconds, the pump will enter into a cycling mode in the same fashion as the computerized pumps
      • The pumps turn off and activate the motor every two and a half minutes and if it senses water, it will continue to run until the water has been removed from the bilge
      • After the debris is removed, the pump will automatically revert to the level sensing mode

    For further details see Installation Guide

    Specifications:

    • Fully automated bilge pump with integral float switch
    • Tough plastic body
    • Low amp draw conserves batteries
    • Ignition protected
    • Outlet Port Size: Threaded 1" NPSM with 1" and 1-1/8" Straight Hose Barbs Included
      • Optional 1" and 1-1/8", 90º Elbows Available (Sold Separately)
    • Dimensions: 150 mm L x 150 mm H x 110 mm W
    • Power: 12 Volt DC
    • Draw: 4.8 Amps
    • Fuse Size: 9 amp
    • Output: Up to 95 liters/minute (21 gallons/minute)
    • Outlet: Threaded 1" NPSM port
      • Accepts the included 1” and 1-1/8” hose barb ports as well as the optional 1” and 1 1/8” 90º elbows (sold separately)
    • Max. recommended discharge head 2 meters
    • Replaces: Rule RM-2000

    Available Models:

    • RM2000A-12 = 12 Volt DC
    • RM2000A-24 = 24 Volt DC

    Rule Pumps Carry a Three-Year Warranty from the Date of Purchase

     
     

     
     

    Have A Suggestion?


    This form is intended to improve the current product page. For Customer Service, please click here

    Help us make our site better for everyone! Let us know you've found something wrong or frustrating on this page and we will improve it. Please mark each that apply.

    Product has been improperly categorized
    Page loads too slowly
    Product information is incorrect
    Page has errors or bugs
    Site is frustrating or difficult to use
    Product image is missing or wrong
    Cannot find my size
    Spelling errors on page
    Not enough product information

    Comments or Examples:
    Examples: Missing information such as dimensions and model number, typos, inaccuracies, etc...

    Please include your e-mail address below if you would like us to respond to your comments or questions.             





           
    Join Our Email List And Receive our Monthly Promotions
    Defender Email Specials
    Click Here For Our Privacy Policy
     
    null