Spartite 2000 Mast Wedge - Large 102 Cubic Inch
KIT #2

This product ships ground only
Spartite 2000 Mast Wedge Replacement System replaces rubber mast wedges with a pourable compound. Spartite 2000 Mast Wedge replaces mast wedges to completely support the mast and seal the cavity between the mast and the partners.
A one-piece custom mast chock is created by pouring two-part liquid Spartite into the deck opening around the mast and allowing it to harden. Once solid, Spartite provides even support around the mast section, absorbs shock loads and distributes rig loads evenly. The one-piece ring ensures proper mast placement at all times and virtually eliminates water leaks. It stays attached to the mast when the rig is out of the boat.
Kits include supplies needed for installation and allow users to build a simple mold for even the most complex partners.
Features
- Spartite 2000 Mast Wedge Replacement System replaces rubber mast wedges with a pourable compound
- Function: Provides uniform support at the partners
- Ensures secure and correct mast position
- Distributes rig loads evenly and absorbs shock loads
- Creates a water tight seal
- Speeds up rig tuning for masts that are unstepped for winter storage
- Kit includes everything needed for installation
- Applications: Kit 1 (51 cu. in.) fits boats in the 20' to 40' size range
- Applications: Kit 2 (102 cu. in.) fits boats in the 36' to 60' size range
- Once components are mixed, Spartite sets up within 15 minutes; fully cures in 2-3 days
In The Box
- Pre-measured Spartite cans
- Modeling clay
- Foam support strips
- Pouring cup
- Stirring sticks
- Plastic gloves
- Vaseline
Other Items Requred But Not Included:
- Razor knife
- Paper towels
- Drop cloth or newspapers
- Alcohol or acetone
- 2" masking tape
Note: Boats in the 36'-40' length range may require Kit 1 or Kit 2, depending on the amount of compound needed to fill in the gap.
Item #: 609099SMWSMA