Cart   null      null
Track Orders
Customer Service
My Account
Logo linked to Defender Homepage
Most Orders Placed Mon - Fri by 4:30 PM ET Ship Same Day!
Call or email to speak with our in-house knowledgeable staff.
Phone: 800-628-8225 | Int'l.: 860-701-3400 | Email: Contact Us
promo A
promo B
promo C
promo D
 

Pettit 1793 Aerosol Transducer Paint

  • Function: Protects Transducers and Underwater Metals
  • Finish: Flat, 93% Pure Zinc in the Dried Film
  • Container: 6 Ounce Aerosol Can
  • Item #: 
    757066
    Brand: 
    Pettit
    Model #: 

    1793

    Packaged Weight: 
    3.00 Lbs.
    Our Price:
    $24.99
    757066 Pettit Pettit 1793 Aerosol Transducer Paint 1793

    Features:

    • Superior transducer and underwater metal protection
      • Pettit 1793 Transducer Paint is for use only on plastic transducer housings and bare metals including steel, stainless steel, cast iron, copper, bronze, galvanized steel and lead
    • It forms an excellent adhesive bond to underwater plastic housings and metals, and inhibits corrosion on these surfaces
    • Transducer Paint's smooth, hard surface will self-clean in service, and can be used above or below the waterline
    • The dried film of Transducer Paint contains 93% pure zinc
    • Excellent adhesion to clean metals and plastic transducer housings
    • Fast dry formula in an easy to use aerosol spray can
    • Number of Coats: 2 or 3
    • Finish: Flat
    • Container: 6 ounce Aerosol Can

    For further details see Product Data Sheet

    Application Information:

    • Shake can vigorously for two minutes after mixing balls begin to rattle
    • Shake often during use
    • Hold can upright 12 to 16 inches from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke
    • Keep the can the same distance from the surface and in motion while spraying
    • Applying in thin coats
    • Allow no more than 5 minutes between two or three thin coats, otherwise allow to dry one hour before applying additional coats
    • When finished spraying, clear spray valve by turning can upside down and spraying until no more paint comes out
    • If valve clogs, twist and pull off spray tip and rinse it in a solvent such as mineral spirits
    • Do not stick a pin or other object in the stem.

    Surface Preparation:

    • Remove all paint from underwater metals, running gear and plastic transducer housings by sanding, scraping, sandblasting or by using a paint and varnish remover
    • Note: Do not use any solvent or paint and varnish remover containing ketone type solvents such as acetone, methyl ethyl ketone or methyl isobutyl ketone as these solvents will destroy the plastic transducer housing
    • Once back to bare, clean metal wipe the surface with Pettit 120 Brushing Thinner and let dry
    • For application to metals above the waterline remove all paint and rust with a wire brush or sandpaper
    • Lightly sand glossy surfaces
    • Clean surface with Pettit 120 Brushing Thinner and let dry
    • NOT FOR USE ON ALUMINUM, FIBERGLASS OR WOOD
    Pettit 1793 Aerosol Transducer Paint
    24.99
     
    Status:  null In Stock

     
    Shipping is delayed due to the high volume

     

    Warning This product ships ground only

    How much paint will I need for my boat?

    Features:

    • Superior transducer and underwater metal protection
      • Pettit 1793 Transducer Paint is for use only on plastic transducer housings and bare metals including steel, stainless steel, cast iron, copper, bronze, galvanized steel and lead
    • It forms an excellent adhesive bond to underwater plastic housings and metals, and inhibits corrosion on these surfaces
    • Transducer Paint's smooth, hard surface will self-clean in service, and can be used above or below the waterline
    • The dried film of Transducer Paint contains 93% pure zinc
    • Excellent adhesion to clean metals and plastic transducer housings
    • Fast dry formula in an easy to use aerosol spray can
    • Number of Coats: 2 or 3
    • Finish: Flat
    • Container: 6 ounce Aerosol Can

    For further details see Product Data Sheet

    Application Information:

    • Shake can vigorously for two minutes after mixing balls begin to rattle
    • Shake often during use
    • Hold can upright 12 to 16 inches from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke
    • Keep the can the same distance from the surface and in motion while spraying
    • Applying in thin coats
    • Allow no more than 5 minutes between two or three thin coats, otherwise allow to dry one hour before applying additional coats
    • When finished spraying, clear spray valve by turning can upside down and spraying until no more paint comes out
    • If valve clogs, twist and pull off spray tip and rinse it in a solvent such as mineral spirits
    • Do not stick a pin or other object in the stem.

    Surface Preparation:

    • Remove all paint from underwater metals, running gear and plastic transducer housings by sanding, scraping, sandblasting or by using a paint and varnish remover
    • Note: Do not use any solvent or paint and varnish remover containing ketone type solvents such as acetone, methyl ethyl ketone or methyl isobutyl ketone as these solvents will destroy the plastic transducer housing
    • Once back to bare, clean metal wipe the surface with Pettit 120 Brushing Thinner and let dry
    • For application to metals above the waterline remove all paint and rust with a wire brush or sandpaper
    • Lightly sand glossy surfaces
    • Clean surface with Pettit 120 Brushing Thinner and let dry
    • NOT FOR USE ON ALUMINUM, FIBERGLASS OR WOOD
     
     

     
     

    Have A Suggestion?

     
           
    Defender Email Specials
    Click Here For Our Privacy Policy
    null