3M Marine OneStep Aluminum Restorer & Polish

Features:

• 3M Marine OneStep Aluminum Restorer & Polish restores the beauty and luster to aluminum
• Removes heavy oxidation and chalking
  • 3M Marine Aluminum Restorer and Polish revives the appearance of aluminum throughout boats by aggressively removing oxidation and stains
  • Turns back the clock on the effects of weathering on aluminum
• 3M Aluminum Restorer and Polish has a light abrasive action that will restore the original luster
• It will restore high gloss surfaces to a highly polished look, while brushed and matte finishes will be restored to original color and luster
• This concentrated formula means a small amount removes a lot of oxidation and chalking.
• Concentrated formula provides a lot of cleaning with a small amount
• May be applied by hand or machine*
• 3M Marine Aluminum Restorer and Polish removes the weathering effects that diminish the lustrous appearance of aluminum over time
  • Aluminum in a boat is especially vulnerable to oxidation and chalking because of all the outdoor exposure
  • Over time weathering effects rob aluminum of its brilliance and make it look old and fatigued
  • 3M™ Marine Aluminum Restorer and Polish turns back the clock to revive the fresh appearance of aluminum
• This product is ideal for cleaning and polishing aluminum deck hardware, cleats, through hulls, stanchions, rails and ladders
• This product is formulated to remove heavy oxidation and restore shine to either bare or painted aluminum
  • For painted aluminum, 3M recommends testing on a small inconspicuous area to determine effect
• Directions for Use
  • Before using this product, please reference Product Label and/or Safety Data Sheet for Health and Safety Information
    • Hand Application:
      • Apply a small amount of material to small area using a 3M™ Microfiber Detail Cloth
      • Rub aggressively using short strokes
      • Keep turning the cloth as more material is applied
      • Buff to a high luster using a clean, soft cloth. Do not stop and allow to haze
    • Machine Application:
      • Apply with an air or electric buffer (1400-2000 Max. RPM) equipped with a 3M™ Perfect-It™ 100% Wool Compounding Pad or 3M™ Perfect-It™ Low Linting 100% Wool Compounding Pad
      • Apply a sufficient amount of material to boat surface to work a 2 foot by 2 foot area
      • Before starting machine, spread the material with a buffing pad to reduce slinging of material and clean up
      • Buff using light to medium pressure in a consistent and uniform pattern
      • Reduce pressure when material begins to dry
      • Repeat if needed

* Note: For best results, use machine application