Isotherm 2351 Compact SP Water Cooled Refrigeration Component System
The Isotherm Compact Classic 2351 is a Water Cooled, Self Pumping (SP**) Refrigeration System that can cool as a refrigerator or as a freezer. The maximum freezer capacity is 1.8 Cubic Feet and the maximum refrigerator capacity is 5.3 cubic feet. This model is cooled directly by the surrounding water because it includes a Self-Pumping Sea Water Pump that eliminates the fan and electric pump for quiet operation and offers very low power consumption.
Sea Water Cooled (SP) Features:
- Fridge or Freezer use
- Sea Water-Cooled / Self Pumping
- Patented SP system eliminates the fan and electric pump for quiet operation and very low power consumption.
- 12/24 Volt DC Danfoss compressor
- Easy installation with pre-charged system, "Click-on" bracket and quick-connect lines
- See more Self Pumping features below
| Specifications |
Isotherm Compact SP 2351
|Maximum Box Volume cu ft.||5.3|
| Dimensions evaporator |
A x B x C inches
|13 x 4 x 9|
| Dimensions compressor |
L x W x H inches
|8 x 5 x 6|
| Power Consumption (Amp) |
Max by 12 V
|Danfoss Compressor Model||BD35F|
** Sea Water-Cooled / Self Pumping: The Isotherm SP unit is a totally new system that is cooled directly by the surrounding water. This means that refrigeration efficiency is completely independent of the air temperature inside the boat. Even on the hottest days of summer - just when a refrigerator is needed most - the sea water-cooled Isotherm SP operates consistently at an extremely high level of efficiency insensitive to high ambient temperatures. It also consumes much less battery power as no fans or pumps are required to dissipate the heat generated by the refrigeration compressor.
Self Pumping Features:
- Sea water cooling for even higher efficiency
- Heat removed by water means cooler boat
- Warm water is continuously pumped out and cold water in, movement which also prevents fouling
- Lower power consumption
- Silent - no fans or pumps
- No extra holes required in hull, no protrusions
- Simple to fit
- Included through-hull fitting is made of salt water-resistant brass and the full-flow coil heat exchanger is of copper-nickel alloy
- Replaces the through-hull fitting for galley sink
- The one meter long pipe connecting it to the compressor and the 3 meter one from the cold-holding plate are both prefilled and fitted with quick-fit connectors.
- Zinc anode comes with the kit
Although heat always rises, if left to the laws of nature the Isotherm SP unit leads the heat downward and out through the hull by utilizing the natural pumping action inside the hull fitting for the galley sink drain hose. As this hose is not restricted by pumps or non-return valves, the flow is completely free. Each movement of the water surrounding the boat reproduces a similar change of the water level inside the hose, resulting in the pumping of a similar quantity of water in and out through the hull fitting.
By designing a special hull fitting containing a non-restricting, full-flow spiral heat exchanger for cooling the heated refrigeration agent, an extremely efficient cooling system is created.
As the hull fitting is always situated some distance from the boat's center of gravity, even the smallest movement of the hull or mast of a sailboat is sufficient to create a pumping action even in the calmest of waters.
Isotherm has a 5-year limited warranty on all compressors. All other parts are covered by a two-year limited warranty with one-year warranty on labor.
Item #: 402829
List Price: From $204.00 To $260.00
MAP Price: From $163.00 To $208.00
Multiple Sizes Available