Polyform CC-4 Center Tube Buoys - 25.5"
- Polyforms CC-4 Series Buoys (Central Tube Buoys) have the same legendary history as their A Series buoys
- Developed shortly after the A Series , the CC has been proven to be a valuable commercial buoy for over 40 years
- Because of the flexible center tube, you will see the CC buoy used in a variety of applications
- Offshore fishing
- Oceanic research equipment
- Fish farming to add buoyancy to their pens
- Mooring buoy *
- Geophysical researchers to tow sonic cannons in search of gas and oil
- People who use Polyforms CC buoys, can count on reliable performance, even in the most extreme conditions
- They include:
- Polyform's unique vinyl valve system
- Even wall thickness for maximum thickness
- Center Hole diameter 2"
- Reinforced flexible center tube
- Central tube with multi-rib reinforcements at both tube openings for more secure connection and through-buoys access to lines
- CC-4 Buoyancy: 187 lbs
CC Series Mooring System: When using the CC series as a mooring ball, please follow these simple instructions to achieve the maximum use and durability of this product:
- The CC series has a flexible center tube. If you use a chain, you must first insert a rigid PVC pipe. (See chart) DO NOT inflate the buoy until you have inserted the pipe.
- Lubricate with oil both the tube and the pipe prior to inserting. Make the length of the pipe so that you have 3 inches extending beyond the top and bottom of the buoy.
- Run a suitable size pin for your load through the top of the pipe and attach the shackle to the chain at the bottom of the buoy.
* Note These Buoys do Not meet the State of Connecticut's Mooring Buoy Regulations (see below). Please Check Your State's Regulations before Purchasing as a Morring Buoy.
- State of Connecticut DEPARTMENT OF TRANSPORTATION I – Rev. 7/97 BUREAU OF AVIATION & PORTS:
MOORING BUOYS SHALL BE WHITE WITH A CLEARLY VISIBLE HORIZONTAL BLUE BAND AROUND THE CIRCUMFERENCE OF THE BUOY CENTERED MIDWAY BETWEEN THE TOP OF THE BUOY AND THE WATERLINE. THE WEIGHT OF THE ANCHOR AND NAME OF THE VESSEL SHOULD BE INDICATED ON THE BUOY.
*NOTE: Polyform buoys and fenders can be inflated either with the Polyform hand pump (item 000920) or almost any form of compressed air that will cover the valve. An inflation adapter (item 000869) is available for use with standard compression nozzles or hand pumps.
Documentation available at the following links:
Item #: 000869
Item #: 000920
Item #: 011921